We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved cable with Molex plug branching to four fan headers, 27cm long

Defendwe

Defendwe 12V 27cm 4-Pin Molex to 4-Port 3/4-Pin Fan Splitter Cable

SKU CH-C24E-DSEN6

Connects one 4-pin Molex supply lead to four 3-pin or 4-pin fans with 12 V power over a 27 cm sleeved cable

  • Connector TypeMicro USB to USB A
  • Connects four fans from one Molex header
  • 27 cm length fits compact chassis builds
  • 12 V output powers standard cooling fans
  • Black sleeved 22 AWG wiring resists abrasion
  • Supports both 3-pin and 4-pin fan connectors

Molex-to-Fan Power Splitter

This 12 V adapter converts a single four-pin Molex connector into four three-pin or four-pin fan headers. The 27 cm black-sleeved cable uses 22 AWG wiring and is intended for desktop power supplies that lack enough native fan plugs. It draws power directly from the PSU so every attached fan runs at full voltage. No PWM signalling is passed through the splitter.

Builders Needing Extra Fan Ports

Suits anyone adding multiple case or radiator fans to a supply with spare Molex leads but insufficient three-pin or four-pin headers. Not for users who require motherboard-controlled fan curves, because the cable does not forward PWM speed signals. Buyers wanting voltage regulation or software fan profiles should look at a powered hub or a motherboard splitter instead.

Simple Plug-In Installation

Push the Molex end into any free peripheral connector on the power supply, then attach up to four fans to the three-pin or four-pin sockets. The keyed plugs prevent reversed insertion. The only common issue is expecting automatic speed control; the fans will spin at 12 V continuously unless the motherboard or a separate controller regulates them.

Highlights

  • Connects four fans from one Molex header
  • 27 cm length fits compact chassis builds
  • 12 V output powers standard cooling fans
  • Black sleeved 22 AWG wiring resists abrasion
  • Supports both 3-pin and 4-pin fan connectors

Specifications

Connector TypeMicro USB to USB A

Questions about this item

Will this 12V splitter work with my existing power supply that only has a 4-pin Molex connector?

Yes, the cable connects a single 4-pin Molex output from your PSU to four 3-pin or 4-pin fan headers, so you can power multiple fans from one connector.

Can I connect older 3-pin fans to the 4-pin ports on this 27cm cable?

The four output ports accept both 3-pin and 4-pin fan plugs, so your older 3-pin fans will fit and receive power without any adapter.

How do I confirm the 22AWG wires are delivering power correctly after I plug in the fans?

When the system is on, each connected fan should spin immediately; if a fan stays still, reseat its plug into the splitter port to ensure a firm connection.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.