We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black aluminium basket compression driver with titanium cone and cushioned mounting face

Deejay LED

Deejay LED TBHDRIVER750 750 Hz compression driver

SKU CH-N8P3-052S6

Titanium cone compression driver with 750 Hz crossover point, 107 dB sensitivity and 80 oz ferrite magnet for large-format waveguides

  • 750 Hz titanium compression driver for clear highs
  • 107 dB sensitivity delivers loud output with less power
  • 80 oz ferrite magnet provides strong magnetic flux
  • 72 mm screw spacing fits PRV Audio WGP22-50 and WG14-50
  • 3-inch Kapton voice coil handles high temperatures

Compression driver for professional audio

The Deejay LED TBHDRIVER750 is a 750 Hz compression driver built for high-output sound reinforcement. It uses a titanium cone and a 3-inch Kapton voice coil driven by an 80 Oz ferrite magnet. The black aluminium basket includes standard bolts for waveguide fastening and suits installers needing high sensitivity in a compact format.

Frequency range and waveguide fit

The driver covers 1000 to 18 kHz with a sensitivity of 107.5 dB. Mounting holes sit on 72 mm centres and the mounting flange measures 125 mm with a cushioned surface. It accepts large-format horn flanges or waveguides such as the PRV Audio WGP22-50 or WG14-50, which are not included.

Power handling and system headroom

The 3-inch voice coil and heavy ferrite motor give the driver ample thermal headroom for sustained high-SPL use in the upper midrange and treble. It runs out of usable output below 1000 Hz, so a separate mid-bass device is required for full-range coverage. Buyers needing lower crossover points or higher continuous power should consider alternative driver formats.

Highlights

  • 750 Hz titanium compression driver for clear highs
  • 107 dB sensitivity delivers loud output with less power
  • 80 oz ferrite magnet provides strong magnetic flux
  • 72 mm screw spacing fits PRV Audio WGP22-50 and WG14-50
  • 3-inch Kapton voice coil handles high temperatures

Specifications

No published specifications for this item yet.

Questions about this item

Should I choose the 750 Hz model or a different driver for my crossover point?

The TBHDRIVER750 is a single-model compression driver; its 1000-18Khz frequency response and 750 Hz designation guide crossover selection around that band.

What does the 107.5dB sensitivity mean when the driver is mounted on a horn in my system?

At 107.5dB sensitivity the driver produces high output with low amplifier power, so typical PA amplifiers can reach loud SPL across the 1000-18Khz range.

Which waveguide bolt pattern does the 125mm mounting diameter with 72mm screw centres actually fit?

The 125mm mounting side and 72mm screw-hole centres match PRV Audio WGP22-50 and WG14-50 waveguides, and the package includes standard bolts for fastening.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.