Deejay LED
Deejay LED TBHANL20 Power Distribution Block 100A fuses 20
Power distribution block with two pre-mounted 100A ANL fuses, accepting 1/0 gauge input and two 8 gauge outputs for high-power audio amplifiers
- Includes two 100 Amp ANL fuses for immediate circuit protection
- Accepts 1/0 gauge input and splits to two 8 gauge outputs for amplifier wiring
- Supplies high-power audio amplifiers from a single main power cable
- Two Allen keys supplied for secure terminal tightening
- Removable clear cover allows visual fuse inspection without tools
Power Distribution Block for Car Audio
The Deejay LED TBHANL20 is a main power distribution block designed for high-power car audio installations. It accepts a single 1/0 gauge input cable and splits it into two 8 gauge outputs. Two ANL fuses rated at 100 A each are premounted for circuit protection.
Installers Splitting One Main Feed
This block suits installers who need to distribute power from one large-gauge wire to two amplifiers or components. It includes two Allen keys and a removable clear cover for inspection. Builders requiring more than two output positions or different fuse ratings should look at other configurations.
Dual 100 A ANL Fuse Configuration
The defining specification is the pair of factory-installed 100 A ANL fuses, which set the maximum protected current for each output branch. The block handles one 1/0 gauge input and two 8 gauge outputs, so the fuse rating determines whether the distribution matches your amplifier power requirements.
Highlights
- Includes two 100 Amp ANL fuses for immediate circuit protection
- Accepts 1/0 gauge input and splits to two 8 gauge outputs for amplifier wiring
- Supplies high-power audio amplifiers from a single main power cable
- Two Allen keys supplied for secure terminal tightening
- Removable clear cover allows visual fuse inspection without tools
Specifications
No published specifications for this item yet.
Questions about this item
What cable sizes does the 1/0 gauge input and 8 gauge outputs accept?
The block accepts one 1/0 gauge input cable and two 8 gauge output cables for power distribution.
How are the included ANL fuses and allen keys used during installation?
Two 100 Amp ANL fuses come premounted; use the supplied allen keys to secure the 1/0 gauge input and 8 gauge output cables under the set screws.
When should the premounted 100 Amp ANL fuses be replaced?
Replace a fuse only after it has blown from an over-current event; the clear removable cover allows visual inspection without tools.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



