We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Case of 96 yellow autobody masking tape rolls 3/8 inch by 60 yards

Decker Tape Products, Inc.

Decker Tape Products Yellow Autobody Masking Tape 3/8" x 60 Yd Case of 96 Rolls

SKU CH-26JE-5G4SC

Yellow autobody masking tape with natural rubber adhesive removes cleanly after high-temperature paint cycles up to 320°F

  • Yellow color gives clear contrast for precise masking
  • Natural rubber adhesive removes cleanly with no residue
  • 16 oz/in adhesion holds firm on curved panels
  • Withstands 320 °F for short bake cycles
  • Case of 96 rolls covers high-volume shop needs

Product identity

This is a case of 96 rolls of yellow autobody masking tape measuring 3/8 inch wide by 60 yards long. It uses a natural rubber adhesive rated at 16 oz/in adhesion and 25 lbs/in tensile strength. The 5.7 mil thickness suits automotive paint masking tasks.

Suitable users and limits

Painters needing high-contrast yellow tape for solvent-based or water-based coatings will find it effective up to 320°F for short cycles. Shops requiring wider tapes, different colours or higher temperature resistance beyond 248°F continuous should consider other options.

Capacity and headroom

The case supplies 96 rolls, each providing 60 yards of coverage for extended workshop use. The tape handles intermittent exposure to 320°F and continuous ranges of 0–248°F. Elongation of 8% means limited stretch before the tape reaches its tensile limit.

Highlights

  • Yellow color gives clear contrast for precise masking
  • Natural rubber adhesive removes cleanly with no residue
  • 16 oz/in adhesion holds firm on curved panels
  • Withstands 320 °F for short bake cycles
  • Case of 96 rolls covers high-volume shop needs

Specifications

BrandThe Tape Supplies Shop

Questions about this item

What surface preparation is needed before applying the 5.7 mil thick tape?

Clean the panel so it is dry and free of wax, silicone or dust; the natural rubber adhesive bonds best to a contaminant-free surface.

Will the 16 oz/in adhesion lift fresh clear-coat when the tape is removed after baking?

The adhesive is formulated to leave no residue on solvent-based or water-based paint systems when pulled within the recommended time window.

How can I confirm the tape withstands the 320°F bake cycle without failure?

After the cycle, inspect the masking line for clean edges and check that the backing shows no brittleness or adhesive transfer.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.