We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Decker Tape Products, Inc.

Decker Tape Products, Inc. Ultra Hi-Temp Masking Tape 3/4" x 60 Yd Case of 48 Rolls

SKU CH-WGZG-H3W6Y

High-temperature masking tape withstands -32°F to 340°F with 22 lbs/in tensile strength and 35 oz/in adhesion

  • Withstands extreme heat up to 340°F
  • Remains flexible in freezing conditions down to -32°F
  • Strong 22 lbs/in tensile strength resists tearing
  • High 35 oz/in adhesion holds on difficult surfaces
  • 48-roll case supplies high-volume masking jobs

High-Temperature Masking Tape

This case contains forty-eight rolls of ultra high-temperature masking tape measuring three-quarter inch by sixty yards. It uses a rubber adhesive and is designed for roofing forms, piping and automotive paint masking where extreme or multiple heat stages are required. The tape meets government specification PPP-T-42C Type I.

Temperature Limits and Adhesion

The tape withstands temperatures from minus thirty-two to three hundred forty degrees Fahrenheit and provides thirty-five ounces per inch of adhesion with twenty-two pounds per inch tensile strength. It is not suited for buyers who need a wider roll, a lower temperature rating or a different adhesive chemistry.

7.5 Mil Thickness

At seven point five mils thick with eight percent elongation, this tape balances conformability and strength for high-heat masking jobs. The single specification that decides fit is the thickness, which determines whether it fits the application gap and masking profile.

Highlights

  • Withstands extreme heat up to 340°F
  • Remains flexible in freezing conditions down to -32°F
  • Strong 22 lbs/in tensile strength resists tearing
  • High 35 oz/in adhesion holds on difficult surfaces
  • 48-roll case supplies high-volume masking jobs

Specifications

BrandThe Tape Supplies Shop

Questions about this item

Will the 3/4" width and 7.5 mil thickness work with my existing 3/4" masking tape dispenser?

The tape is 3/4" wide and 7.5 mil thick, matching standard dispensers built for that width and similar caliper.

How can I verify the rubber adhesive is holding at the rated 35 oz/in adhesion after I apply it?

Press firmly to activate the rubber adhesive; a bond that resists peeling at room temperature and holds through heat cycles up to 340 °F confirms the 35 oz/in rating.

Does the case of 48 rolls include a dispenser or cutter, or must I buy one separately?

The case contains 48 rolls of 3/4" x 60 Yd tape only; a dispenser or cutter is not included and must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.