We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four clear polypropylene tape rolls printed with bold RUSH lettering on white cores

Decker Tape Products, Inc.

Decker Tape Products, Inc. "RUSH" Printed Tape 1.9 mil 3" x 1000 Yd Case of 4 Rolls

SKU CH-0MFS-Q981W

Printed polypropylene tape for box sealing and light bundling with 26 lbs/in tensile strength and 48 oz/in adhesion

  • TypePackaging Tape & Dispensers
  • Hot-melt rubber adhesive delivers strong 48 oz/in adhesion for reliable seals
  • 9 mil polypropylene film provides 26 lbs/in tensile strength for secure bundling
  • 165 % elongation allows tape to stretch without breaking under tension
  • Withstands 45 to 120 °F for consistent performance in varied climates
  • 1000-yard rolls in a four-roll case supply high-volume packaging needs

Hot-melt printed tape for box sealing

This 1.9 mil polypropylene tape carries a bold "RUSH" print and a hot-melt rubber adhesive. Each roll is three inches wide and one thousand yards long, supplied in a case of four. It is built for fast box sealing and light bundling in shipping departments, warehouses and fulfilment lines.

Adhesive and film properties that change daily use

The hot-melt rubber system gives 48 oz/in adhesion and 26 lbs/in tensile strength with 165% elongation. That combination delivers quick stick, strong fibre tear and a tight, quiet unwind. The film resists moisture, chemicals and weathering, so sealed cartons stay closed through varied handling conditions.

Temperature range and roll length to verify before

The tape is rated for 45 to 120 degrees Fahrenheit, so confirm your storage and transit environments stay within that window. Each roll provides one thousand yards; check that your dispensers accept three-inch cores and that the case quantity matches your volume needs.

Highlights

  • Hot-melt rubber adhesive delivers strong 48 oz/in adhesion for reliable seals
  • 9 mil polypropylene film provides 26 lbs/in tensile strength for secure bundling
  • 165 % elongation allows tape to stretch without breaking under tension
  • Withstands 45 to 120 °F for consistent performance in varied climates
  • 1000-yard rolls in a four-roll case supply high-volume packaging needs

Specifications

TypePackaging Tape & Dispensers
BrandThe Tape Supplies Shop

Questions about this item

Will the hot melt rubber adhesive lose its 48 oz/in adhesion after long storage?

The adhesive system resists moisture, chemicals, cold, heat and weathering, so the 48 oz/in adhesion remains stable when the tape is stored properly.

At what temperature does the 1.9 mil polypropylene film start to soften under constant sealing work?

The tape withstands up to 120 °F; sustained heat above that level is the first limit that can reduce tensile performance.

How much heat does the roll generate when the dispenser runs continuously all day?

The tape itself produces no heat; only the dispenser mechanism warms slightly, and the tape stays within its 45 °F to 120 °F operating range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.