We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four rolls of clear polypropylene packaging tape printed with "Inspected" text, each three inches wide on a large core

Decker Tape Products, Inc.

Decker Tape Products, Inc. "Inspected" Printed Packaging Tape 3in x 1000yd 1.9mil 4 Rolls

SKU CH-STKA-EPZED

Polypropylene packaging tape printed "Inspected" for box sealing and light bundling, 1.9 mil thick with 26 lbs/in tensile strength and 48 oz/in adhesion across a 45 to 120 °F range

  • TypePackaging Tape & Dispensers
  • Inspected" print speeds up carton checks
  • Hot-melt rubber adhesive gives 48 oz/in quick stick
  • 26 lbs/in tensile strength holds heavy boxes
  • 9 mil film resists moisture, chemicals and weathering
  • 45 °F to 120 °F range suits cold stores and hot trucks

Warehouse box-sealing tape

This 1.9 mil polypropylene tape carries a pre-printed "Inspected" message for quick quality identification. Hot melt rubber adhesive delivers 48 oz/in adhesion and 26 lbs/in tensile strength. Each roll provides 1000 yards of continuous length for high-volume sealing. The case contains four rolls ready for dispenser loading.

Capacity and headroom

Elongation of 165% lets the film stretch around irregular cartons without snapping. The adhesive remains functional from 45 to 120 degrees Fahrenheit, covering cold-storage and warm-shipping environments. Moisture, chemical and weathering resistance protects seals during extended transit. Heavy pallets or sharp-edged loads exceed the 26 lbs/in limit and require reinforced strapping tape instead.

Upgrade from standard clear tape

Printed wording removes the need for separate inspection stamps or handwritten notes. Hot melt rubber outperforms acrylic adhesives on recycled corrugate and dusty surfaces. The 1.9 mil thickness balances roll economy with tear resistance for single-strip closures. Operations needing tamper-evident security or heavier bundling should select filament-reinforced grades.

Highlights

  • Inspected" print speeds up carton checks
  • Hot-melt rubber adhesive gives 48 oz/in quick stick
  • 26 lbs/in tensile strength holds heavy boxes
  • 9 mil film resists moisture, chemicals and weathering
  • 45 °F to 120 °F range suits cold stores and hot trucks

Specifications

TypePackaging Tape & Dispensers
BrandThe Tape Supplies Shop

Questions about this item

Will the 3-inch width fit my existing hand-held tape dispenser?

The tape is 3 inches wide, matching the standard core size used by most industrial hand dispensers.

How can I confirm the 1.9 mil thickness and 26 lbs/in tensile strength are performing correctly after I start using it?

A clean, tight unwind with immediate fiber-tear adhesion on corrugated boxes shows the hot-melt rubber adhesive is delivering the specified 48 oz/in adhesion and 26 lbs/in tensile strength.

Does the case include a dispenser or just the four printed rolls?

The case contains four 1000-yard rolls of "Inspected" printed polypropylene tape; no dispenser is included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.