We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Case of 72 rolls of 1/2-inch by 18-yard tissue tape

Decker Tape Products, Inc.

Decker Tape Products, Inc. High-Low DC Tissue Tape 1/2" x 18 Yd Case of 72 Rolls

SKU CH-26DD-7Y9ZZ

Double-coated tissue tape with 4.6 oz/in low-tack and 11 oz/in high-tack acrylic adhesive for ATG applicators, 3.2 mil thick, 18 yd rolls, case of 72

  • Repositionable hold for envelopes and packaging
  • Double-coated with low-tack and high-tack acrylic sides
  • 2 mil tissue carrier tears cleanly by hand
  • 6 oz/in low-tack adhesion removes without residue
  • Withstands temperatures from -4 to 176 °F

Repositionable Tape for ATG Dispensers

This double-coated tissue tape is designed for use with ATG applicators and suits temporary holding tasks. It works well for reclosable envelopes, core start-up, end tabbing of paper, foils, and films, plus mounting promotional items or attaching cards in mailers. The low-tack side allows clean removal from delicate surfaces without leaving residue. It is sold as a case of 72 rolls.

Temperature Range and Adhesion Levels

The acrylic adhesive functions across a range of -4 to 176 degrees Fahrenheit. The tape measures 3.2 mil thick and provides two distinct adhesion values: 4.6 oz/in on the low-tack side and 11 oz/in on the high-tack side. Tensile strength is rated at 0 lbs/in with zero percent elongation, meaning the tape is not intended for structural bonding or load-bearing applications.

High and Low Tack Sides for Temporary Work

The differential adhesive coating changes how the tape behaves on each substrate. The high-tack side anchors firmly to the base material while the low-tack side holds the removable item gently. This arrangement supports temporary packaging seals, removable labels, and protective films that must be peeled away cleanly. No dispenser or additional hardware is included in the case.

Highlights

  • Repositionable hold for envelopes and packaging
  • Double-coated with low-tack and high-tack acrylic sides
  • 2 mil tissue carrier tears cleanly by hand
  • 6 oz/in low-tack adhesion removes without residue
  • Withstands temperatures from -4 to 176 °F

Specifications

BrandThe Tape Supplies Shop

Questions about this item

How do I load the 1/2" x 18 Yd rolls into my ATG applicator without the liner tearing?

Thread the roll so the low-tack side feeds first, keep the liner flat against the guide roller, and advance slowly for the first few inches to prevent the 3.2 mil tissue from stretching.

Will the adhesive lose its repositionable quality after months on paper or foil?

The acrylic formulation resists oxidation; the 4.6 oz/in low-tack side stays removable and the 11 oz/in high-tack side stays bonded through the full -4 to 176 °F range.

At what temperature does the tape start to fail during continuous outdoor exposure?

Performance is rated to 176 °F; sustained heat above that softens the acrylic and reduces the 4.6 oz/in adhesion first.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.