We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green powder coating tape, 16 rolls in a case

Decker Tape Products, Inc.

Decker Tape Products, Inc. Green Powder Coating Tape 3" x 72 Yd Case of 16 Rolls

SKU CH-BX0V-DGDVP

Green powder-coating tape with silicone adhesive withstands 32–435 °F and removes cleanly

  • Case of 16 rolls keeps high-volume jobs supplied
  • Silicone adhesive removes cleanly without residue
  • Withstands 32 to 435 °F for powder-coating cycles
  • 50 lbs/in tensile strength resists tearing during masking
  • 5 mil thickness balances conformability and durability

Green Powder Coating Tape Case

This case contains sixteen rolls of green polyester tape designed for powder-coating masking tasks. Each roll measures three inches wide by seventy-two yards long and uses a silicone adhesive system. The tape is also noted for masking ink cartridges on fax and copy machines. It is supplied new in a bulk case for workshop or office use.

Suited for high-temp masking jobs

The tape handles temperatures from thirty-two to four-hundred-thirty-five degrees Fahrenheit, making it suitable for powder-coating ovens. Its tensile strength of fifty pounds per inch and one-hundred-percent elongation allow conforming to irregular parts. Buyers needing a different width, length or adhesive chemistry should look elsewhere. This product is not for general-purpose packaging or low-temp sealing.

3.5 mil thickness with silicone adhesive

The film measures three-point-five mils thick and delivers twenty-five ounces per inch of adhesion. Clean removal after high-heat exposure is a key characteristic of the silicone adhesive. This specification determines whether the tape fits a particular masking process. Verify thickness and adhesion needs before ordering.

Highlights

  • Case of 16 rolls keeps high-volume jobs supplied
  • Silicone adhesive removes cleanly without residue
  • Withstands 32 to 435 °F for powder-coating cycles
  • 50 lbs/in tensile strength resists tearing during masking
  • 5 mil thickness balances conformability and durability

Specifications

BrandThe Tape Supplies Shop

Questions about this item

Does this tape require a specific surface preparation or primer before application on metal parts for powder coating?

The tape uses a silicone adhesive on a 2 mil green polyester film designed for clean removal after powder coating at temperatures up to 435°F, with 25 oz/in adhesion and 50 lbs/in tensile strength.

Will the 3.5 mil thickness and silicone adhesive leave residue on older fax machine ink cartridges during high-heat cycles?

The tape withstands 32°F to 435°F with 100% elongation and 25 oz/in adhesion, engineered for clean, easy removal from ink cartridges on fax and copy machines after exposure to heat.

How can I verify the tape is performing correctly during a powder coating run?

Confirm the tape maintains adhesion through the 435°F cure cycle, shows no adhesive transfer on removal, and the masked edges remain sharp with the green polyester film intact.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.