We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Decker Tape Products, Inc.

Decker Tape Products, Inc. Green Powder Coating Tape 1/2" x 72 Yd Case of 72 Rolls

SKU CH-RFRD-8RW61

Green powder-coating tape with silicone adhesive withstands 32 to 435 °F, offers 50 lbs/in tensile strength and 25 oz/in adhesion across 72 rolls

  • Silicone adhesive removes cleanly after high-heat masking
  • Withstands 32° - 435°F for powder-coating cycles
  • 50 lbs/in tensile strength resists tearing on sharp edges
  • 5 mil thickness and 25 oz/in adhesion hold firm
  • 72 rolls per case supply high-volume production lines

Green Powder Coating Tape

This green powder coating tape is designed for masking parts during powder coating processes and for protecting ink cartridges on fax and copy machines. It is supplied as a case of 72 rolls, each measuring 1/2 inch wide by 72 yards long, providing a high-volume supply for industrial or office environments.

Silicone Adhesive Installation

The tape uses a silicone adhesive that allows clean and easy removal without leaving residue on surfaces. Applying the tape smoothly on curved or textured parts can be difficult; air bubbles or wrinkles may reduce masking effectiveness and cause powder to bleed under the edges.

Pre-Order Setup Check

Verify that your powder coating oven operates within the 32 to 435 degrees Fahrenheit temperature range this tape withstands. Confirm the 1/2 inch width matches the masking detail required for your parts and that the 3.5 mil thickness suits your coating build.

Highlights

  • Silicone adhesive removes cleanly after high-heat masking
  • Withstands 32° - 435°F for powder-coating cycles
  • 50 lbs/in tensile strength resists tearing on sharp edges
  • 5 mil thickness and 25 oz/in adhesion hold firm
  • 72 rolls per case supply high-volume production lines

Specifications

BrandThe Tape Supplies Shop

Questions about this item

How do I know the tape is performing correctly after I apply it?

The tape should mask cleanly through powder-coating cycles up to 435 °F and remove without residue, showing no lifting at the 50 lbs/in tensile rating.

What comes in the case and is anything else required?

The case contains 72 rolls of 1/2" x 72 yd green polyester film with silicone adhesive; no additional items are needed for standard masking.

Which roll width and length should I select for my masking jobs?

This case provides 1/2-inch by 72-yard rolls — choose it when you need that exact width and yardage for high-temperature powder-coating work.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.