We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gold metalised Mylar tape rolls in a case of 36

Decker Tape Products, Inc.

Decker Tape Products, Inc. Gold Metalized Mylar Tape 1" x 72 Yd Case of 36 Rolls

SKU CH-687J-8MSH4

Gold metalized Mylar tape with acrylic adhesive, 18 lbs/in tensile strength, 30 oz/in adhesion and 60 % elongation withstands 0–300 °F for splicing and decorative trim

  • Gold film aids electronic splice detection
  • Acrylic adhesive bonds from 0°F to 300°F
  • 18 lbs/in tensile strength resists tearing
  • 30 oz/in adhesion holds on curved surfaces
  • 72-yard rolls in 36-roll case supply volume

Gold Metalized Mylar Tape

This gold metalized Mylar tape measures one inch wide and seventy-two yards long per roll. A case contains thirty-six rolls for high-volume use. The acrylic adhesive bonds to many surfaces. It suits industrial splicing and decorative tasks.

Suited for splicing and trim

Buyers needing a thin, conductive tape for electronic detection or roll-end marking will find the two-mil film effective. The adhesive holds from zero to three hundred degrees Fahrenheit. Users requiring a wider roll or a different adhesive chemistry should consider other options.

Capacity and headroom

Each roll delivers seventy-two yards of continuous length. Tensile strength reaches eighteen pounds per inch and adhesion measures thirty ounces per inch. Elongation of sixty percent absorbs stress during application. The temperature ceiling of three hundred degrees Fahrenheit defines the upper limit for high-heat splicing.

Highlights

  • Gold film aids electronic splice detection
  • Acrylic adhesive bonds from 0°F to 300°F
  • 18 lbs/in tensile strength resists tearing
  • 30 oz/in adhesion holds on curved surfaces
  • 72-yard rolls in 36-roll case supply volume

Specifications

BrandThe Tape Supplies Shop

Questions about this item

Will the 2 mil thickness and acrylic adhesive bond reliably to the metal housing on my older splicing equipment?

The 2 mil film and acrylic adhesive are designed for splicing at up to 300 °F, so they adhere to clean metal surfaces on legacy machines without residue.

How can I verify the 18 lbs/in tensile strength and 60 % elongation are performing correctly after I apply the tape?

After application, pull a test strip; it should stretch noticeably before breaking, confirming the 18 lbs/in tensile rating and 60 % elongation are active.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.