We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Case of 96 rolls double coated tissue tape acrylic adhesive 3/8 inch by 60 yards

Decker Tape Products, Inc.

Decker Tape Products, Inc. Double Coated Tissue Tape Acrylic Adhesive 3/8" x 60 Yd Case of 96 Rolls

SKU CH-0M5G-5RSZ3

A case of 96 double-coated tissue tape rolls, each 3/8" wide by 60 yards long, with acrylic adhesive rated at 5.5 lbs/in tensile strength and 54 oz/in adhesion

  • Acrylic adhesive bonds reliably across 32 to 302 °F
  • 1 mil thickness handles heat printing and heavy splicing
  • 54 oz/in adhesion secures leather, fabric and plastic parts
  • 5 lbs/in tensile strength supports flying splices and corrugator rolls
  • Case of 96 rolls at 60 yards each supplies high-volume production

Double-coated tissue tape for industrial splicing

This double-coated tissue tape uses an acrylic adhesive formulated for corrugator splicing, automatic business-form application, flying splices in printing, and heat-print bonding processes. It also suits mounting plastic parts, heavy-weight substrates, difficult surfaces, and seaming leather to leather or fabric. The case contains ninety-six rolls, each 3/8 inch wide by 60 yards long.

Acrylic adhesive with 5.1 mil thickness and 54

The acrylic adhesive delivers 54 ounces per inch of adhesion on a 5.1 mil thick carrier. Tensile strength is rated at 5.5 pounds per inch with 3 percent elongation. The adhesive maintains performance across a temperature range from 32 to 302 degrees Fahrenheit.

Sustained high-tack performance through extended

High tack is retained during prolonged exposure to the full 32-to-302-degree range, supporting continuous heat-print processes and long-run splicing without adhesive breakdown. The consistent 5.5 lb/in tensile strength and low elongation resist creep under constant tension in automatic applicators. Ninety-six-roll case volume supports uninterrupted production schedules.

Highlights

  • Acrylic adhesive bonds reliably across 32 to 302 °F
  • 1 mil thickness handles heat printing and heavy splicing
  • 54 oz/in adhesion secures leather, fabric and plastic parts
  • 5 lbs/in tensile strength supports flying splices and corrugator rolls
  • Case of 96 rolls at 60 yards each supplies high-volume production

Specifications

BrandThe Tape Supplies Shop

Questions about this item

How do I apply the 3/8" wide tape for a flying splice on a printing press?

Align the tissue carrier carefully on both webs, press firmly to engage the 54 oz/in acrylic adhesive, and avoid stretching beyond the 3% elongation limit so the splice holds at speed.

What degradation should I watch for after months of heat-printing cycles?

The acrylic adhesive remains stable across the 32 to 302 °F range, but inspect edges for adhesive ooze or carrier embrittlement if temperatures repeatedly approach the upper limit.

At what point does the 5.1 mil tissue carrier become the limiting factor during a long production run?

The 5.5 lbs/in tensile strength will be reached before the adhesive fails, so monitor web tension to stay below that threshold and prevent the tape from snapping.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.