We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cardboard case containing 72 rolls of double-coated tissue tape, half-inch wide, white core visible

Decker Tape Products, Inc.

Decker Tape Products, Inc. Double Coated Tissue Tape 1/2" x 60 Yd Case of 72 Rolls

SKU CH-047K-RTB0W

Double-coated tissue tape with acrylic adhesive, 5.1 mil thick, 54 oz/in adhesion, 5.5 lbs/in tensile strength, and 32 to 302 °F range

  • Acrylic adhesive bonds at up to 302 °F
  • 5 lbs/in tensile strength handles heavy splicing
  • 54 oz/in adhesion grips difficult surfaces
  • 1 mil thickness suits automatic application
  • Case of 72 rolls each 60 yd long

Double-coated tissue tape for industrial splicing

This double-coated tissue tape uses an acrylic adhesive system built for corrugator splicing, automatic business-form application, flying splices in print production, heat-print bonding, mounting plastic parts, heavy-weight and difficult surface jobs, and seaming leather to leather or fabric. It ships as a case of 72 rolls, each roll measuring 1/2 inch wide by 60 yards long, so high-volume lines stay supplied.

Thermal stability from 32 to 302 degrees Fahrenheit

The acrylic adhesive maintains its bond across a 32 to 302 degrees Fahrenheit range, so the tape performs in cold storage and through heat-print processes without losing tack. At 5.1 mil thick it delivers 54 ounces per inch of adhesion and 5.5 pounds per inch of tensile strength with 3 percent elongation, giving consistent holding power under thermal cycling.

Seventy-two-roll case supports continuous

A case of 72 rolls keeps automatic applicators fed for long runs, reducing change-over downtime in corrugator, print and converting operations. The high-tack acrylic formulation bonds immediately to difficult surfaces and withstands the heat of printing processes, so operators spend less time managing splice failures and more time running production.

Highlights

  • Acrylic adhesive bonds at up to 302 °F
  • 5 lbs/in tensile strength handles heavy splicing
  • 54 oz/in adhesion grips difficult surfaces
  • 1 mil thickness suits automatic application
  • Case of 72 rolls each 60 yd long

Specifications

BrandThe Tape Supplies Shop

Questions about this item

How do I apply the 1/2" wide tape so the acrylic adhesive bonds properly on a corrugator splice?

Unwind the 60-yard roll and press the 5.1 mil tissue carrier firmly onto both surfaces; the 54 oz/in tack grabs instantly, but you must apply even pressure across the full width or the splice will lift under tension.

When will the adhesive on these rolls degrade enough to need replacement?

The acrylic adhesive holds its 54 oz/in adhesion from 32 °F up to 302 °F, so rolls stored at room temperature stay usable for years; only prolonged exposure above 302 °F or contamination with oils will force early replacement.

What fails first on a continuous flying-splice run at high speed?

The 5.5 lbs/in tensile strength of the tissue carrier is the limiting factor; if web tension exceeds that figure the tape will snap before the adhesive releases.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.