We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Case of 36 blue polyester film tape rolls 1 inch by 72 yards

Decker Tape Products, Inc.

Decker Tape Products, Inc. Blue Polyester Film Tape 1" x 72 Yd Case of 36 Rolls

SKU CH-9RZY-FRRWA

Blue polyester film tape with silicone adhesive for splicing, masking and liner manufacturing, 36 rolls of 72 yards each, 2.5 mil thick with 20 lbs/in tensile strength and 20 oz/in adhesion.

  • Silicone adhesive bonds silicone papers and polyethylene
  • 5 mil thickness gives 20 lbs/in tensile strength
  • 20 oz/in adhesion secures electronic parts during masking
  • Withstands 32 to 385 degrees Fahrenheit for high-heat processes
  • Case of 36 rolls each 1 inch by 72 yards

Blue Polyester Film Tape for Splicing

This blue polyester film tape uses a silicone adhesive for splicing silicone papers and polyethylene. It also masks electronic parts during the manufacture of silicone liners by paper converters. The tape is supplied as a case of 36 rolls.

Sustained High-Temperature Performance

The tape withstands temperatures ranging from 32 to 385 degrees Fahrenheit during continuous exposure. It provides excellent resistance to chemicals and fumes under these sustained conditions. A tensile strength of 20 lbs/in and 100% elongation maintain bond integrity.

1-Inch Width by 72-Yard Length

Each roll measures 1 inch wide by 72 yards long with a 2.5 mil thickness. Adhesion is rated at 20 oz/in for reliable holding power. Buyers needing a different width, length, or adhesive chemistry should select another product.

Highlights

  • Silicone adhesive bonds silicone papers and polyethylene
  • 5 mil thickness gives 20 lbs/in tensile strength
  • 20 oz/in adhesion secures electronic parts during masking
  • Withstands 32 to 385 degrees Fahrenheit for high-heat processes
  • Case of 36 rolls each 1 inch by 72 yards

Specifications

BrandThe Tape Supplies Shop

Questions about this item

Does the tape soften or lose grip when a machine runs continuously near 385 °F?

The tape is rated from 32 °F to 385 °F, so it maintains adhesion and tensile strength through extended high-temperature cycles.

What surface preparation or primer is required before applying the silicone adhesive?

Clean the substrate of oils and dust; the 20 oz/in silicone adhesive bonds directly to silicone papers, polyethylene and electronic parts without extra primer.

Will the 2.5 mil polyester film tear when pulled over sharp edges on legacy splicing equipment?

At 20 lbs/in tensile strength and 100 % elongation the film stretches rather than snaps, even on older metal guides.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.