We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Case of 144 rolls of blue MOPP strapping tape

Decker Tape Products, Inc.

Decker Tape Products, Inc. Blue 171# MOPP Strapping Tape 1/2" x 60 Yd Case of 144 Rolls

SKU CH-2FDG-E8ERM

Blue MOPP strapping tape with 171 lbs/in tensile strength, 4.4 mil thickness, and 35% elongation for appliance and coil tabbing

  • High tensile strength holds heavy loads securely with 171 lbs/in rating
  • Natural rubber adhesive bonds reliably across surfaces delivering 22.92 oz/in adhesion
  • Thin 4.4 mil profile applies easily while maintaining strong holding power
  • Low 35% elongation keeps strapping tight without stretching under tension
  • Bulk case of 144 rolls each 60 yards long supports high-volume packaging operations

Blue 171# MOPP Strapping Tape

This blue 171# MOPP strapping tape is built for the appliance industry and for tabbing coils of steel and aluminium. It uses a natural rubber adhesive that leaves no residue on removal. The tape measures 4.4 mil thick and delivers 171 lbs/in tensile strength. A case contains 144 rolls, each 60 yards long.

Upgrading from general-purpose tape

Switch to this tape when a standard carton-sealing product cannot hold heavy coils or appliance components. The 171 lbs/in tensile strength and 22.92 oz/in adhesion handle loads that lighter tapes cannot. The 35% elongation keeps strapping tight without stretching loose. It is not suited for applications that require a lower tensile rating or a different adhesive chemistry.

Installation and common issues

Apply the tape by hand or with a standard dispenser; the natural rubber adhesive bonds quickly to metal and painted surfaces. Ensure the substrate is clean and dry so the 22.92 oz/in adhesion reaches full value. The tape remains functional down to 0 Fahrenheit, but extreme cold can stiffen the film and reduce initial tack. Avoid over-tensioning beyond the rated elongation to prevent snapping.

Highlights

  • High tensile strength holds heavy loads securely with 171 lbs/in rating
  • Natural rubber adhesive bonds reliably across surfaces delivering 22.92 oz/in adhesion
  • Thin 4.4 mil profile applies easily while maintaining strong holding power
  • Low 35% elongation keeps strapping tight without stretching under tension
  • Bulk case of 144 rolls each 60 yards long supports high-volume packaging operations

Specifications

BrandThe Tape Supplies Shop

Questions about this item

What dispenser or core size does the 1/2" wide tape need?

The tape comes on standard 3-inch cores and fits any hand-held or desktop dispenser made for 1/2" width rolls.

How do I apply the 4.4 mil thick MOPP tape so the 22.92 oz/in adhesion bonds properly?

Clean the surface, press the tape firmly along its full length to activate the natural rubber adhesive, and avoid stretching beyond the 35% elongation limit.

When should I replace a roll that has been stored near the 0°F lower temperature limit?

If the tape becomes brittle, loses tack, or no longer removes cleanly without residue, discard the roll and open a fresh one from the case.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.