We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Case of sixteen double coated tissue tape rolls, three inch by sixty yard, acrylic adhesive

Decker Tape Products, Inc.

Decker Tape Products, Inc. 3" x 60 Yd Double Coated Tissue Tape Case of 16 Rolls

SKU CH-0CN7-69CAE

Double-coated tissue tape with acrylic adhesive, 43 oz/in adhesion and 14 lbs/in tensile strength, supplied in a case of 16 rolls

  • Strong bond for corrugated splicing with 43 oz/in adhesion
  • High tensile strength of 14 lbs/in resists tearing
  • Wide 284 °F temperature range suits heat processes
  • Lightweight 4 mil tissue conforms to uneven surfaces
  • Case of 16 rolls gives 60 yards each for volume work

Double Coated Tissue Tape Case

This double coated tissue tape is supplied as a case of 16 rolls, each measuring 3 inches wide by 60 yards long. It is intended for corrugated splicing, lamination and mounting plastic parts in industrial and commercial settings. The acrylic adhesive on both sides bonds to a variety of substrates without the need for mechanical fasteners.

Adhesion Strength and Temperature Range

The tape provides 43 oz/in of adhesion and a tensile strength of 14 lbs/in while remaining 4 mil thick. It withstands temperatures up to 284 degrees Fahrenheit, so the bond remains stable in warm production environments. The lightweight micro porous tissue carrier conforms to irregular surfaces without adding bulk.

Sustained Load and Elongation

Under sustained load the tape shows an elongation of 5 percent, indicating controlled creep rather than sudden failure. The solvent based acrylic adhesive maintains its tack over extended periods, resisting shear forces during continuous splicing or mounting operations. This behaviour suits applications where the bond must endure constant stress for long durations.

Highlights

  • Strong bond for corrugated splicing with 43 oz/in adhesion
  • High tensile strength of 14 lbs/in resists tearing
  • Wide 284 °F temperature range suits heat processes
  • Lightweight 4 mil tissue conforms to uneven surfaces
  • Case of 16 rolls gives 60 yards each for volume work

Specifications

BrandThe Tape Supplies Shop

Questions about this item

How do I apply the 3-inch wide tissue tape without trapping air bubbles?

Unroll the tape slowly while pressing firmly with a roller or squeegee from the centre outward; the 4 mil thickness and acrylic adhesive need even pressure to wet out the porous tissue carrier and eliminate voids.

When will the 43 oz/in adhesion start to drop and require roll replacement?

The acrylic adhesive resists ageing well; replace rolls once the adhesive surface is contaminated, the liner tears, or the tape no longer bonds corrugated splices at the rated 14 lbs/in tensile strength.

At what temperature does the tape lose holding power during continuous operation?

The tape is rated to 284 °F; sustained exposure near or above that limit softens the acrylic adhesive first, causing shear failure on plastic mounts or laminated panels before the tissue carrier degrades.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.