We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Case of 24 printed polypropylene packaging tape rolls, 3 inches wide, clear finish with red text

Decker Tape Products, Inc.

Decker Tape Products, Inc. 3" x 110 Yd 1.9 mil PP Hot Melt Printed Tape Case of 24 Rolls

SKU CH-R712-SCNCM

Case of 24 printed polypropylene rolls with hot-melt rubber adhesive, 1.9 mil thickness, 26 lbs/in tensile strength and 48 oz/in adhesion for box sealing and light bundling

  • TypePackaging Tape & Dispensers
  • 24 rolls per case cover high-volume sealing needs
  • 9 mil thickness resists tearing during heavy box handling
  • Hot melt rubber adhesive bonds instantly to corrugated surfaces
  • 26 lbs/in tensile strength secures loads without splitting
  • 48 oz/in adhesion holds firm from 45 to 120 °F

Printed Box-Sealing Tape

This case contains 24 rolls of polypropylene tape printed with "Notice to Consignee and Carrier" for shipping identification. Each roll measures 3 inches wide by 110 yards long with a 1.9 mil thickness. The hot melt rubber adhesive delivers 48 oz/in adhesion and 26 lbs/in tensile strength. It suits warehouses and shipping departments needing visible handling instructions on cartons.

Surface And Temperature Check

Verify that cartons are clean and dry before application to achieve full 48 oz/in adhesion. The tape performs across a 45 to 120 degrees Fahrenheit range, so confirm your storage and transit environments stay within these limits. Cold or damp surfaces may reduce initial tack despite the moisture-resistant adhesive. Ensure dispensers accommodate a 3-inch core width.

Durable Polypropylene Construction

The 1.9 mil film resists moisture, chemicals, and weathering during extended storage or transit. Hot melt rubber adhesive provides quick stick and fiber tear for secure seals on recycled or corrugated boxes. A 165 percent elongation allows the tape to stretch without snapping under load. Tight unwind reduces noise and waste during high-volume packing.

Highlights

  • 24 rolls per case cover high-volume sealing needs
  • 9 mil thickness resists tearing during heavy box handling
  • Hot melt rubber adhesive bonds instantly to corrugated surfaces
  • 26 lbs/in tensile strength secures loads without splitting
  • 48 oz/in adhesion holds firm from 45 to 120 °F

Specifications

TypePackaging Tape & Dispensers
BrandThe Tape Supplies Shop

Questions about this item

What comes in the case and do I need a separate dispenser?

The case contains 24 rolls of 3" x 110 Yd printed tape; a dispenser is not included and must be purchased separately if required.

How do I decide between the available roll specifications?

This case provides a single specification — 1.9 mil thickness, 26 lbs/in tensile strength, 48 oz/in adhesion, and 165% elongation — so there are no alternative versions to choose from.

What does the 26 lbs/in tensile strength mean when I seal a carton?

It indicates the force the tape can withstand before breaking, helping the seal hold during handling and transit for box sealing and light bundling tasks.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.