We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Decker Tape Products, Inc.

Decker Tape Products, Inc. 2" x 60 Yd Clear 2.9 mil Box Sealing Tape Case of 36 Rolls

SKU CH-X7TQ-HC1H7

Clear 2.9 mil polypropylene tape with hot melt rubber adhesive seals boxes across a 35 to 140 °F range, delivering 65 oz/in adhesion and 50 lbs/in tensile strength in a 36-roll case

  • TypePackaging Tape & Dispensers
  • Strong hold with 65 oz/in adhesion on boxes
  • 9 mil polypropylene film resists tearing at 50 lbs/in tensile
  • Hot melt rubber adhesive stays sticky from 35 to 140 degrees Fahrenheit
  • 110 percent elongation lets tape stretch without snapping
  • Case of 36 rolls gives 60 yards each for high-volume sealing

2.9 mil Clear Box Sealing Tape

This clear polypropylene tape measures two inches wide and sixty yards long per roll, supplied in a case of thirty-six rolls. It is built for sealing corrugated cartons in packing stations, warehouses and fulfilment centres. The hot-melt rubber adhesive bonds quickly to recycled and virgin fibreboard alike. The 2.9 mil thickness balances tear resistance with easy hand dispensing.

Fits standard two-inch core dispensers

The three-inch core fits industry-standard hand guns and bench-top dispensers without adapters. Each roll provides sixty yards of continuous length, reducing roll-change frequency on high-volume lines. Hot-melt rubber adhesive eliminates the need for water-activated systems or heat-seal equipment. The tape unwinds smoothly, freeing operator time for packing rather than wrestling with adhesion failures.

Holds under sustained tension

Rated at fifty pounds per inch tensile strength, the film resists splitting when cartons shift on pallets or in transit. Adhesion of sixty-five ounces per inch keeps seals intact through vibration and stack compression. The tape remains functional from thirty-five to one-hundred-forty degrees Fahrenheit, so seals survive cold-storage loading docks and sun-baked truck trailers alike. One-hundred-ten percent elongation lets the tape stretch with carton movement instead of snapping.

Highlights

  • Strong hold with 65 oz/in adhesion on boxes
  • 9 mil polypropylene film resists tearing at 50 lbs/in tensile
  • Hot melt rubber adhesive stays sticky from 35 to 140 degrees Fahrenheit
  • 110 percent elongation lets tape stretch without snapping
  • Case of 36 rolls gives 60 yards each for high-volume sealing

Specifications

TypePackaging Tape & Dispensers
BrandThe Tape Supplies Shop

Questions about this item

How long will the 2.9 mil tape hold under continuous 50 lbs/in tension before it snaps?

The tape is rated at 50 lbs/in tensile strength, so sustained loads at that level will cause failure; design seals with a safety margin below the rated figure.

Does the hot-melt rubber adhesive soften or lose grip when the warehouse hits 140 °F all day?

The adhesive is specified for 35–140 °F operation; at the upper limit it remains functional but prolonged exposure near 140 °F can reduce long-term bond durability.

What dispenser core size do I need to run these 36 rolls on my existing equipment?

Each roll is 2 inches wide with a standard 3-inch core, compatible with most handheld and desktop box-tape dispensers.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.