We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Case of 36 printed polypropylene tape rolls with "Do Not Double Stack" warning text

Decker Tape Products, Inc.

Decker Tape Products, Inc. 2" x 55 Yd 1.9 mil "Do Not Double Stack" Printed Tape 36 Rolls

SKU CH-WDEQ-KS2X1

A case of 36 rolls of 1.9 mil polypropylene tape printed with "Do Not Double Stack" for box sealing and light bundling

  • TypePackaging Tape & Dispensers
  • Clear warning prevents double-stacking damage
  • Hot melt rubber adhesive gives 48 oz/in quick stick
  • 9 mil film delivers 26 lbs/in tensile strength
  • 165 % elongation absorbs shock during transit
  • Works from 45 °F to 120 °F in cold or heat

Box-sealing tape for shipping departments

This case contains 36 rolls of 2-inch wide polypropylene tape printed with a "Do Not Double Stack" warning. Each roll supplies 55 yards of 1.9 mil film coated with a hot-melt rubber adhesive. The construction is intended for carton sealing and light bundling tasks in warehouse or fulfilment environments.

Adhesion and temperature limits

The hot-melt adhesive delivers 48 ounces per inch of adhesion and maintains bond integrity across a 45 to 120 degree Fahrenheit range. Tensile strength reaches 26 pounds per inch while elongation measures 165 percent. The tape resists moisture, chemicals and weathering, but the printed legend restricts its use to packages that must not be stacked.

1.9 mil thickness defines load capacity

At 1.9 mil the film suits lightweight to medium cartons; heavier loads or high-stress closures will require a thicker grade. Buyers sealing bulky or dense shipments should verify that the 26 lbs/in tensile rating meets their box-test requirements before committing to a full case.

Highlights

  • Clear warning prevents double-stacking damage
  • Hot melt rubber adhesive gives 48 oz/in quick stick
  • 9 mil film delivers 26 lbs/in tensile strength
  • 165 % elongation absorbs shock during transit
  • Works from 45 °F to 120 °F in cold or heat

Specifications

TypePackaging Tape & Dispensers
BrandThe Tape Supplies Shop

Questions about this item

Should I choose the single roll or the case of 36 rolls for regular warehouse use?

The case contains 36 rolls, each 2 inches wide by 55 yards long, giving you a continuous supply for high-volume box sealing and light bundling without frequent reorders.

What does the 1.9 mil thickness mean for everyday box sealing?

At 1.9 mil thick the tape delivers 26 lbs per inch tensile strength and 48 oz per inch adhesion, so it holds cartons securely while resisting moisture, chemicals and temperature swings from 45 to 120 °F.

Does the hot melt rubber adhesive work on standard polypropylene tape dispensers?

Yes, the hot melt rubber adhesive on this 1.9 mil polypropylene film is designed for a tight unwind and quick stick on common hand-held or desktop dispensers used for packaging tape.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.