We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Case of 36 clear polypropylene tape rolls, 2 inch by 110 yard, 3.1 mil thick

Decker Tape Products, Inc.

Decker Tape Products, Inc. 2" x 110 Yd Clear 3.1 mil Polypropylene Box Sealing Tape Case 36 Rolls

SKU CH-CH16-J8X64

Clear 3.1 mil polypropylene box sealing tape with acrylic adhesive, 25 oz/in adhesion and 38 lbs/in tensile strength, supplied in a 36-roll case of 110-yard rolls

  • TypePackaging Tape & Dispensers
  • Acrylic adhesive holds cartons securely with 25 oz/in adhesion
  • 38 lbs/in tensile strength resists splitting under heavy loads
  • 1 mil polypropylene film stays intact from -40 to 140 °F
  • 160 % elongation absorbs shocks without snapping
  • Case of 36 rolls each 110 yd long supports high-volume packing

Clear 3.1 mil Polypropylene Box Sealing Tape

This case contains 36 rolls of clear polypropylene tape measuring 2 inches by 110 yards with a 3.1 mil thickness. Acrylic adhesive provides 25 oz/in adhesion and 38 lbs/in tensile strength for reliable box sealing. The tape operates across a temperature range of -40° to 140° Fahrenheit. Elongation reaches 160% for secure closure.

Verify dispenser compatibility

Confirm your dispenser accepts a 2 inch wide roll before ordering. Ensure the cartons or surfaces you seal are clean and dry for optimal acrylic adhesive bond. Consider the 110 yard length per roll against your typical packing volume. The tape withstands -40° to 140° Fahrenheit, so check storage and transit conditions match this range.

Replaces thinner or less temperature resistant tapes

Upgrade from tapes below 3.1 mil thickness when higher tensile strength of 38 lbs/in is needed for heavier cartons. Switch to this acrylic formula if previous tapes failed in cold storage or hot transit outside a narrower temperature band. The 160% elongation helps absorb shock during handling. Not suited for applications requiring specialised adhesives such as filament reinforced or security tamper evident tapes.

Highlights

  • Acrylic adhesive holds cartons securely with 25 oz/in adhesion
  • 38 lbs/in tensile strength resists splitting under heavy loads
  • 1 mil polypropylene film stays intact from -40 to 140 °F
  • 160 % elongation absorbs shocks without snapping
  • Case of 36 rolls each 110 yd long supports high-volume packing

Specifications

TypePackaging Tape & Dispensers
BrandThe Tape Supplies Shop

Questions about this item

Does the case of 36 rolls include a dispenser, or must I buy one separately?

The case contains 36 rolls of 2" x 110 Yd clear polypropylene tape with acrylic adhesive; a dispenser is not included and must be purchased separately.

Should I choose the 3.1 mil version over a thinner tape for heavier cartons?

At 3.1 mil thick with 38 lbs/in tensile strength and 25 oz/in adhesion, this tape is rated for box sealing and handles heavier cartons better than thinner grades.

Will the 38 lbs/in tensile strength hold a sealed box through a -40° F to 140° F temperature swing?

Yes, the acrylic adhesive maintains its 25 oz/in adhesion and 38 lbs/in tensile strength across the full -40° F to 140° F range, so seals stay secure in extreme cold or heat.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.