We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Case of 36 printed polypropylene tape rolls, 2 inch by 110 yard, 1.9 mil clear film with red text

Decker Tape Products, Inc.

Decker Tape Products, Inc. 2" x 110 Yd 1.9 mil PP Hot Melt Printed Tape Case of 36 Rolls

SKU CH-31VH-9RZSH

Printed polypropylene tape with hot-melt rubber adhesive seals boxes and bundles, resisting moisture, chemicals and temperatures from 45 to 120 degrees Fahrenheit

  • TypePackaging Tape & Dispensers
  • Hot-melt rubber adhesive delivers 48 oz/in adhesion
  • 9 mil polypropylene film provides 26 lbs/in tensile strength
  • 165 % elongation allows tape to stretch without snapping
  • Operates from 45 °F to 120 °F for cold and hot environments
  • Case of 36 rolls each 110 yards long for high-volume sealing

Product Identity

This printed polypropylene tape measures 2 inches wide by 110 yards long and comes in a case of 36 rolls. It is designed for warehouse staff and shipping departments that need a single tape to seal cartons and bundle lighter items. The bold "Notice to Consignee and Carrier" legend adds a handling instruction directly on the seal.

Thermal & Power

The hot-melt rubber adhesive remains functional from 45 to 120 degrees Fahrenheit, resisting moisture, chemicals and weathering across that range. No power draw or noise is generated because the product is a passive consumable. Adhesion measures 48 ounces per inch while tensile strength reaches 26 pounds per inch.

Build Fit

Each roll uses a standard 3-inch core that fits common hand-held dispensers and desktop units. The 1.9 mil thickness and 165 percent elongation allow tight unwind without stretching or tearing during application. The case of 36 rolls keeps high-volume stations supplied without frequent reordering.

Highlights

  • Hot-melt rubber adhesive delivers 48 oz/in adhesion
  • 9 mil polypropylene film provides 26 lbs/in tensile strength
  • 165 % elongation allows tape to stretch without snapping
  • Operates from 45 °F to 120 °F for cold and hot environments
  • Case of 36 rolls each 110 yards long for high-volume sealing

Specifications

TypePackaging Tape & Dispensers
BrandThe Tape Supplies Shop

Questions about this item

How do I apply the 2" wide tape correctly and what step is often missed?

Use a hand dispenser matched to the 2" width; the step often missed is pressing firmly along the full length so the hot-melt rubber adhesive achieves the stated 48 oz/in adhesion.

When will the 1.9 mil PP tape need replacing in storage or use?

Replace rolls if they exceed the 45° - 120° Fahrenheit range, show moisture damage, or lose tack; the 165% elongation means it stretches before breaking, so inspect for over-stretched sections.

What limit appears first when the tape is under constant load?

The 26 lbs/in tensile strength is the first limit; sustained loads near that value will cause the polypropylene film to elongate toward its 165% maximum before failure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.