We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black polyester film tape rolls in a case of 36

Decker Tape Products, Inc.

Decker Tape Products, Inc. 1" x 36 Yd Black Polyester Film Tape Case of 36 Rolls

SKU CH-4FW0-KH19M

Black polyester film tape with acrylic adhesive, 2.4 mil thick, 23 lbs/in tensile strength and 27 oz/in adhesion, supplied as 36 rolls of 1" x 36 yd

  • Strong hold with 27 oz/in acrylic adhesive
  • Durable 23 lbs/in tensile strength for demanding tasks
  • Wide -22 to 302?F temperature resistance
  • Flexible 90% elongation conforms to irregular surfaces
  • Bulk case of 36 rolls each 36 yards long

1-Inch Wide Polyester Film Tape

This black polyester film tape measures one inch wide and thirty-six yards long per roll and is sold in a case of thirty-six rolls. It is suited for packaging operations, maintenance crews and assembly lines that need a strong, solvent-resistant film for web splicing, edge reinforcing, hinge taping, sealing and decorative edging.

-22 to 302 Fahrenheit Temperature Range

The acrylic adhesive maintains its bond across a range from minus twenty-two to three hundred and two degrees Fahrenheit. At 2.4 mil thickness the tape delivers twenty-seven ounces per inch of adhesion and twenty-three pounds per inch of tensile strength while stretching up to ninety percent before breaking, giving reliable hold in both freezing and high-heat environments.

2.4 Mil Thickness With Acrylic Adhesive

The thin polyester carrier conforms to irregular surfaces and contours without adding bulk, making it practical for tight seams and curved edges. Supplied in a standard case quantity, the rolls are ready for dispenser loading or hand application in production, shipping and maintenance settings.

Highlights

  • Strong hold with 27 oz/in acrylic adhesive
  • Durable 23 lbs/in tensile strength for demanding tasks
  • Wide -22 to 302?F temperature resistance
  • Flexible 90% elongation conforms to irregular surfaces
  • Bulk case of 36 rolls each 36 yards long

Specifications

BrandThe Tape Supplies Shop

Questions about this item

How do I apply the 1" wide polyester film tape so the 27 oz/in adhesion bonds properly?

Clean the surface thoroughly, then press the tape down firmly along its full 36-yard length to activate the acrylic adhesive; the step most often missed is skipping the initial pressure pass, which leaves weak spots.

When will the 2.4 mil black tape need replacement in a high-temperature splicing job?

The tape withstands continuous exposure from -22 to 302 °F, so replacement is only needed if the film tears or the 23 lbs/in tensile strength is exceeded; inspect edges periodically for lifting.

What is the first limit reached when the tape runs continuously over rollers at speed?

The 90 % elongation limit appears first — once the film stretches beyond that point it will not recover, so tension must stay below the 23 lbs/in tensile rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.