We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Case of 144 rolls of 1/4 inch by 60 yard light duty mono filament tape

Decker Tape Products, Inc.

Decker Tape Products, Inc. 1/4" x 60 Yd Light Duty Mono Filament Tape Case of 144 Rolls

SKU CH-1S5B-EDM9M

Light-duty mono filament tape with rubber adhesive, 3.9 mil thick, 100 lbs/in tensile strength and 78 oz/in adhesion across a 32–125 °F range, supplied as 144 rolls of 1/4" x 60 yd

  • Strong holding power for lightweight bundling with 100 lbs/in tensile strength
  • Reliable adhesion on various surfaces with 78 oz/in rubber adhesive
  • Performs in cold and hot environments from 32 to 125 degrees Fahrenheit
  • Thin 3.9 mil profile conforms easily to irregular shapes
  • Bulk case of 144 rolls each 60 yards long reduces reorder frequency

Light-Duty Mono Filament Tape

This light-duty mono filament tape uses a rubber adhesive for lightweight bundling tasks. A case contains one hundred and forty-four rolls, each measuring one-quarter inch wide by sixty yards long. The tape is three point nine mil thick and offers seventy-eight ounces per inch of adhesion.

Best for simple bundling

It suits operations that need an economical filament for basic carton sealing or light package reinforcement. Buyers who require heavy-duty strapping or high-temperature resistance beyond one hundred and twenty-five degrees Fahrenheit should look at something else.

Works in standard dispensers

The rolls fit common hand-held tape dispensers and apply cleanly between thirty-two and one hundred and twenty-five degrees Fahrenheit. With one hundred pounds per inch of tensile strength, the tape secures bundles without adding bulk, freeing up storage space compared to heavier strapping materials.

Highlights

  • Strong holding power for lightweight bundling with 100 lbs/in tensile strength
  • Reliable adhesion on various surfaces with 78 oz/in rubber adhesive
  • Performs in cold and hot environments from 32 to 125 degrees Fahrenheit
  • Thin 3.9 mil profile conforms easily to irregular shapes
  • Bulk case of 144 rolls each 60 yards long reduces reorder frequency

Specifications

BrandThe Tape Supplies Shop

Questions about this item

Does the 1/4" width fit my standard handheld tape dispenser?

The rolls are 1/4 inch wide, so they fit most desktop dispensers that accept quarter-inch cores; check your dispenser's maximum roll diameter because each roll holds 60 yards of 3.9 mil film.

Will the rubber adhesive on this mono filament tape bond reliably to the recycled corrugated boxes I already use?

Rubber adhesive delivers 78 oz/in adhesion across the 32 to 125 °F range, giving consistent grab on recycled fibre without the cold‑temperature brittleness seen with some hot‑melt formulations.

How can I verify the 100 lbs/in tensile strength is holding on my lightweight bundles?

After applying the tape, pull the bundle gently; the 4 % elongation lets you feel a firm, steady resistance rather than a sudden snap, confirming the filament is carrying the load as rated.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.