We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Case of 144 rolls of 1/4 inch wide 36 yard low tack ATG adhesive transfer tape

Decker Tape Products, Inc.

Decker Tape Products, Inc. 1/4" x 36 Yd 1.2 mil Low Tack ATG Adhesive Transfer Tape Case of 144 Rolls

SKU CH-08QF-STMQD

Low-tack acrylic transfer tape for temporary bonding and mounting, 1.2 mil thick with .45 oz/in adhesion, supplied in a case of 144 rolls

  • Low-tack acrylic adhesive allows clean removal
  • 2 mil thickness suits thin bonding tasks
  • 45 oz/in adhesion strength for temporary holds
  • Withstands -22 to 230 °F temperature range
  • Case of 144 rolls fits ATG dispenser systems

Bulk Low-Tack ATG Transfer Tape

This case contains 144 rolls of 1/4-inch by 36-yard adhesive transfer tape on a 1-inch ATG core. The 1.2-mil unsupported acrylic film is designed for bonding, mounting and laminating foams, foils, fabrics, paper, metal and plastic nameplates where removability is desired.

Installation with ATG Dispenser

The reverse-wound rolls load into an ATG gun that lays down adhesive and rewinds the liner automatically for a smooth application. No liner waste is left behind, but the system requires a compatible ATG dispenser to function.

Temperature and Adhesion Limits

The acrylic adhesive operates from -22 to 230 degrees Fahrenheit and provides 0.45 oz/in adhesion with zero tensile strength. It is unsuitable for structural bonds, high-shear loads or permanent outdoor exposure.

Highlights

  • Low-tack acrylic adhesive allows clean removal
  • 2 mil thickness suits thin bonding tasks
  • 45 oz/in adhesion strength for temporary holds
  • Withstands -22 to 230 °F temperature range
  • Case of 144 rolls fits ATG dispenser systems

Specifications

BrandThe Tape Supplies Shop

Questions about this item

How can I confirm the tape is dispensing correctly on my ATG gun after loading a roll?

The roll should feed smoothly from the 1" core, lay down a clear 1.2 mil adhesive film, and the liner must rewind automatically inside the dispenser without tearing.

What exactly is included in the case and do I need to purchase an applicator separately?

The case contains 144 rolls of 1/4" x 36 yd reverse-wound tape on 1" ATG cores; an ATG adhesive transfer gun is not included and must be bought separately.

Which roll size should I select for general temporary mounting on paper and plastic?

This single configuration — 1/4" wide by 36 yards long at 1.2 mil thickness with 0.45 oz/in low-tack acrylic adhesive — is the only version offered in the 144-roll case.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.