We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cardboard case containing 72 rolls of clear bi-directional filament tape with visible reinforcing fibers

Decker Tape Products, Inc.

Decker Tape Products, Inc. 1/2" x 60 Yd Bi-Directional Filament Tape Case of 72 Rolls

SKU CH-61AJ-CQ0AE

High-performance bi-directional filament tape with 131 lbs/in tensile strength and 78 oz/in adhesion for heavy-duty bundling and splicing

  • High tensile strength for heavy bundling with 131 lbs/in rating
  • Rubber adhesive delivers 78 oz/in quick-stick on most surfaces
  • Bi-directional filament gives cross-directional strength for splicing tasks
  • Wide 0 to 160°F temperature range suits warehouse conditions
  • Case of 72 rolls each 60 yards long supports volume use

Industrial bundling tape

This high-performance bi-directional filament tape is built for aggressive warehouse bundling, heavy-duty splicing and rolled carpet securing. The rubber adhesive delivers quick-stick bonding to most surfaces with high conformability. A case contains 72 rolls, each 1/2 inch wide by 60 yards long, supplying volume for continuous packing lines.

Temperature and adhesion performance

The tape operates reliably from 0 to 160 degrees Fahrenheit, maintaining grip in cold storage and warm transit environments. It provides 78 ounces per inch of adhesion and 131 pounds per inch of tensile strength at a 6 mil thickness. Elongation of 10 percent allows the film to absorb shock without snapping during load shifts.

Cross-directional filament reinforcement

Bi-directional filaments give the tape strong cross-directional tensile strength, which is the key advantage for splicing and packaging tasks that stress the seal sideways. The rubber adhesive system ensures immediate grab on corrugated, plastic and wood surfaces. No dispensers, blades or software are included in the case.

Highlights

  • High tensile strength for heavy bundling with 131 lbs/in rating
  • Rubber adhesive delivers 78 oz/in quick-stick on most surfaces
  • Bi-directional filament gives cross-directional strength for splicing tasks
  • Wide 0 to 160°F temperature range suits warehouse conditions
  • Case of 72 rolls each 60 yards long supports volume use

Specifications

BrandThe Tape Supplies Shop

Questions about this item

How do you apply the 1/2" wide bi-directional filament tape so the rubber adhesive bonds properly?

Clean the surface, then press the tape firmly with the 6 mil thickness to activate the 78 oz/in adhesion; the step often missed is using enough pressure across the full width so the filaments engage evenly.

What maintenance or replacement will the 131 lbs/in tensile strength tape need after long-term bundling?

Inspect rolls for adhesive degradation if stored beyond the 0° - 160° Fahrenheit range; replace any roll that shows loss of quick-stick or reduced cross-directional hold on heavy bundles.

At what temperature limit does the filament tape start to lose holding power during sustained warehouse use?

The 160° Fahrenheit upper limit is reached first; above it the rubber adhesive softens and the 10% elongation can increase, reducing the 131 lbs/in tensile strength on continuous loads.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.