We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Case of 72 rolls of 1/2 inch by 36 yard double-sided tissue tape on dispenser cores

Decker Tape Products, Inc.

Decker Tape Products, Inc. 1/2" x 36 Yd High-Low DC Tissue Tape Case of 72 Rolls

SKU CH-9NZE-5XB9V

Double-coated tissue tape with high-tack and low-tack acrylic adhesive for removable mounting and splicing, 3.2 mil thick, 4.6 oz/in low-side adhesion, 11 oz/in high-side adhesion.

  • Repositionable hold for envelopes and cores
  • 2 mil tissue carrier fits ATG dispensers
  • Low-tack side removes cleanly from paper and film
  • 6 oz/in adhesion on removable side
  • Withstands -4 to 176 °F for varied environments

High-Low DC Tissue Tape Case

This case supplies 72 rolls of double-coated tissue tape designed for ATG applicators. It targets packaging lines, mail houses and print shops that need quick, repositionable bonds on paper, foil and film substrates. The acrylic adhesive system delivers a permanent high-tack side and a removable low-tack side for versatile assembly tasks. Each roll measures 1/2 inch wide by 36 yards long.

Sustained Application Performance

The tape maintains its 4.6 oz/in low-tack adhesion and 11 oz/in high-tack adhesion across a -4 to 176 degrees Fahrenheit service range. Its 3.2 mil thickness and zero-percent elongation prevent stretch during continuous dispensing on high-speed equipment. Acrylic chemistry resists oxidation and UV exposure so bond reliability does not degrade during long production runs. The tissue carrier remains stable without adding bulk to finished packages.

Installation and Common Issues

Rolls load directly into standard ATG guns without tools or liner rewinding. Operators must match the high-tack side to the permanent substrate and the low-tack side to the removable component or the bond will not release cleanly. Dust or oils on the surface reduce the low-tack grab, so substrates should be clean and dry before application. Extreme cold below the rated minimum can make the adhesive brittle and difficult to initiate.

Highlights

  • Repositionable hold for envelopes and cores
  • 2 mil tissue carrier fits ATG dispensers
  • Low-tack side removes cleanly from paper and film
  • 6 oz/in adhesion on removable side
  • Withstands -4 to 176 °F for varied environments

Specifications

BrandThe Tape Supplies Shop

Questions about this item

Does the 3.2 mil tissue tape generate any fumes or heat when run continuously through an ATG dispenser?

The acrylic adhesive tape operates silently with no heat or fumes; it simply unwinds at room temperature for all-day use.

What dispenser is required to apply this 1/2" x 36 Yd transfer tape?

It is made for ATG (adhesive transfer gun) dispensers that accept 1/2-inch wide rolls on a 3-inch core.

Will the 4.6 oz/in low-tack side release cleanly from older coated papers and foils without tearing?

Yes, the low-tack acrylic side is designed for clean removal from papers, foils and films, leaving no residue on vintage or current stocks.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.