We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Case of 72 rolls of half-inch by thirty-six-yard low-tack ATG transfer tape, 1.2 mil thick, on one-inch cores

Decker Tape Products, Inc.

Decker Tape Products, Inc. 1/2" x 36 Yd 1.2 mil Low Tack ATG Transfer Tape Case of 72 Rolls

SKU CH-PR05-W0924

Low-tack acrylic transfer tape on ATG-compatible cores, 1.2 mil thick with .45 oz/in adhesion, 36-yard rolls in a 72-roll case for temporary bonding from -22 to 230 degrees Fahrenheit

  • Low-tack acrylic adhesive allows clean removal
  • 2 mil thickness gives precise bond control
  • 45 oz/in adhesion suits temporary mounting
  • Withstands -22 to 230 °F for varied environments
  • ATG reverse-wound core enables fast dispensing

Low Tack Transfer Tape

This 1.2 mil acrylic adhesive transfer tape comes on a 1/2 inch by 36 yard roll and is supplied as a case of 72 rolls. It is designed for use with ATG dispenser systems and provides a low tack bond that allows clean removal from foams, foils, fabrics, paper, metal and plastic nameplates. The reverse wound construction with a 1 inch ID core ensures smooth lay down and automatic liner rewind during application.

Temporary bonding applications

The tape suits users who need removable mounting, splicing or laminating where residue free release is required. Its low tack adhesive and 0.45 oz/in adhesion are not intended for permanent structural bonds or high stress load bearing joints. Buyers who need a permanent high strength adhesive should look at a different product.

ATG dispenser compatibility

Each roll is reverse wound on a 1 inch ID core made for ATG adhesive transfer guns. The dispenser automatically rewinds the liner as the tape is applied which speeds up repetitive bonding tasks. No additional accessories or software are included with the case of 72 rolls.

Highlights

  • Low-tack acrylic adhesive allows clean removal
  • 2 mil thickness gives precise bond control
  • 45 oz/in adhesion suits temporary mounting
  • Withstands -22 to 230 °F for varied environments
  • ATG reverse-wound core enables fast dispensing

Specifications

BrandThe Tape Supplies Shop

Questions about this item

Does the 1.2 mil tape need an ATG dispenser with a 1 inch core to apply it?

Yes, the roll is reverse wound on a 1 inch core and is designed for an ATG gun that rewinds the liner as you apply the adhesive.

Will the 0.45 oz/in low tack adhesive hold on metal nameplates and plastic without leaving residue when removed?

The acrylic adhesive is formulated for temporary bonding on metal, plastic, paper and fabric and is described as removable for applications where removability is desired.

After dispensing, how can I confirm the tape is laying down smoothly at the specified 1.2 mil thickness?

The ATG system automatically rewinds the liner, giving a consistent adhesive lay down; you can verify the 1.2 mil thickness by measuring the applied film with a micrometer.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.