We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Case of 96 clear polyester film tape rolls 3/8 inch by 72 yards

Decker Tape Products, Inc.

Decker Tape Products Clear Polyester Film Tape 3/8" x 72 Yd Case of 96 Rolls

SKU CH-2C50-3FK4C

Clear polyester film tape with rubber adhesive, 1.6 mil thick, 34 lbs/in tensile strength and 18 oz/in adhesion for holding and splicing

  • Strong hold with 18 oz/in rubber adhesive
  • Handles stress with 34 lbs/in tensile strength
  • Performs from 32° to 176° Fahrenheit
  • Thin 1.6 mil film stretches 120%
  • Bulk case of 96 rolls each 72 yards

Clear Polyester Film Tape 3/8" x 72 Yd

This clear polyester film tape comes in a case of 96 rolls, each measuring 3/8 inch wide by 72 yards long. It is suited for offices and mailrooms needing bulk supply for temporary holding, edge splicing and hinge applications.

Temperature Range and Adhesive Performance

The rubber adhesive functions across a 32 to 176 degree Fahrenheit range. At 1.6 mil thickness the tape delivers 18 ounces per inch adhesion and 34 pounds per inch tensile strength with 120 percent elongation.

96-Roll Case Quantity

A single case provides 96 rolls, making it practical for high-volume mailing or packaging operations. Buyers needing smaller quantities or a different adhesive chemistry should consider other options.

Highlights

  • Strong hold with 18 oz/in rubber adhesive
  • Handles stress with 34 lbs/in tensile strength
  • Performs from 32° to 176° Fahrenheit
  • Thin 1.6 mil film stretches 120%
  • Bulk case of 96 rolls each 72 yards

Specifications

BrandThe Tape Supplies Shop

Questions about this item

How do I apply the 3/8" wide polyester film tape without trapping air bubbles?

Unroll the tape slowly, press the rubber adhesive side down with firm, even pressure using a plastic squeegee or fingertip, and smooth from the centre outward; the 1.6 mil film conforms best when applied at room temperature.

When will the rubber adhesive lose its 18 oz/in. bond strength and need replacement?

The adhesive remains stable across the 32°–176° F range; prolonged exposure near the upper limit or UV light gradually reduces tack, so plan to re‑tape high‑stress splices after several months of continuous service.

At what load does the 34 lbs/in. tensile strength become the limiting factor during sustained pulling?

Continuous tension approaching 34 lbs/in. will cause the 1.6 mil polyester film to elongate up to 120 % before snapping, so design splices to stay well below that threshold for long‑term reliability.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.