We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Decker Tape Products, Inc.

Decker Tape Products 3" x 1000 Yd 1.9 mil Printed Tape 4 Rolls

SKU CH-X048-6V6YS

Printed polypropylene tape seals boxes and light bundles with 1.9 mil thickness, 26 lbs/in tensile strength and 48 oz/in adhesion across 45 to 120 °F

  • TypePackaging Tape & Dispensers
  • Printed security message deters tampering on sealed cartons
  • Hot melt rubber adhesive bonds quickly to corrugated surfaces
  • 26 lbs/in tensile strength resists splitting under load
  • 48 oz/in adhesion holds firm from 45 to 120 °F
  • 1000-yard rolls on 1.9 mil film reduce changeover frequency

3-Inch Printed Security Tape

This 3-inch wide polypropylene tape carries a printed "STOP If Seal Is Broken" message for tamper evidence. It ships as a case of four rolls, each 1,000 yards long, suited to warehouse packing stations and shipping departments. The hot melt rubber adhesive bonds quickly to corrugated cartons and holds during transit. It is not for users who need a plain, unprinted film or a narrower width for hand dispensers.

1.9 Mil Thickness and 26 lbs/in Strength

At 1.9 mil thick, the film provides 26 lbs/in tensile strength and 48 oz/in adhesion for reliable box sealing and light bundling. The 165 percent elongation lets the tape stretch over irregular surfaces without snapping. It runs out on heavy pallet loads or packages that demand a reinforced strapping tape with higher tensile ratings.

Hot Melt Adhesive for Standard Cartons

The synthetic rubber hot melt system resists moisture, chemicals and weathering across a 45 to 120 degree Fahrenheit range. It unwinds tightly on standard 3-inch core dispensers and tears cleanly by hand. It frees the packer from water-activated dispensers but does not suit freezer-grade applications below 45 degrees or surfaces that require an acrylic adhesive for long-term archival storage.

Highlights

  • Printed security message deters tampering on sealed cartons
  • Hot melt rubber adhesive bonds quickly to corrugated surfaces
  • 26 lbs/in tensile strength resists splitting under load
  • 48 oz/in adhesion holds firm from 45 to 120 °F
  • 1000-yard rolls on 1.9 mil film reduce changeover frequency

Specifications

TypePackaging Tape & Dispensers
BrandThe Tape Supplies Shop

Questions about this item

Will the 3 inch width of this tape work with my existing 3 inch hand dispenser?

Yes, each roll is 3 inches wide so it fits standard 3 inch tape dispensers and carton sealers.

How can I confirm the hot melt adhesive is bonding properly after I seal a carton?

The tape should show immediate quick stick, resist unwind tension, and produce fiber tear on the box when pulled, indicating the 48 oz/in adhesion is active.

Does the case include a dispenser or only the four printed rolls?

The case contains four 1000 yard rolls of 1.9 mil polypropylene tape with the "STOP If Seal Is Broken" print; no dispenser is included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.