We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black laptop CPU cooling fan with wire connector

DBTLAP

DBTLAP Laptop CPU Cooling Fan MacBook Pro 15 A1286 MG62090V1-Q020-S99

SKU CH-1C37-E4KNX

Replacement CPU cooling fan for 15-inch MacBook Pro A1286 models MC371, MC372 and MC373, rated 5 V and 1.1 W

  • Accessory TypeCooler
  • Compatible with MacBook Pro 15 A1286 models
  • Replaces part numbers MG62090V1-Q020-S99 and M98.RHSD1.17H
  • Matches MC371 MC372 MC373 original specifications
  • Operates at 5V 1.1W for efficient cooling
  • New condition ensures reliable performance from installation

Replacement Fan for MacBook Pro 15

This DBTLAP cooling fan is a direct replacement for the internal CPU cooler in Apple MacBook Pro 15-inch models carrying the A1286 identifier. It matches the original MG62090V1-Q020-S99 part number and the M98.RHSD1.17H reference used in several service manuals. The unit ships new and includes only the fan assembly itself. Installers should verify the part number against the existing component before fitting.

Low-Power 5 V 1.1 W Operation

Rated at 5 volts and 1.1 watts, the fan draws minimal current from the logic board while providing targeted airflow over the processor heatsink. The low power figure helps preserve battery runtime and keeps the thermal subsystem within its design envelope. No external power adapter or controller is required; the fan connects directly to the existing motherboard header. Acoustic output remains consistent with the factory cooling profile.

Compatibility Check Before Installation

The fan is listed for MacBook Pro 15 units with model numbers MC371, MC372 and MC373, but the supplier advises a visual comparison with the original part before purchase. Differences in connector orientation or mounting tabs can exist even within the same A1286 series. Builders who need a different connector layout or a higher-flow alternative should look for a fan that matches their specific board revision.

Highlights

  • Compatible with MacBook Pro 15 A1286 models
  • Replaces part numbers MG62090V1-Q020-S99 and M98.RHSD1.17H
  • Matches MC371 MC372 MC373 original specifications
  • Operates at 5V 1.1W for efficient cooling
  • New condition ensures reliable performance from installation

Specifications

Accessory TypeCooler

Questions about this item

How do I install the MG62090V1-Q020-S99 fan in my MacBook Pro 15 A1286, and what step is often missed?

Remove the bottom case, disconnect the old fan cable from the logic board, fit the new MG62090V1-Q020-S99 unit, reconnect the cable securely, then reassemble; the step often missed is re-seating the connector fully so the 5V 1.1W power link is solid.

What maintenance or replacement will the MG62090V1-Q020-S99 need later?

Blow dust from the fan blades and heatsink fins periodically; if bearing noise appears or airflow falls, replace the fan with another MG62090V1-Q020-S99 unit.

What limit appears first when the MG62090V1-Q020-S99 runs under sustained load?

The 5V 1.1W power budget caps maximum RPM, so prolonged heavy loads hit the thermal ceiling before the fan can spin faster.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.