We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black laptop CPU cooling fan with wire connector

DBTLAP

DBTLAP laptop CPU cooling fan for Dell Inspiron 16 Plus 7620 RTX3060 023.100U5.0001 0996D2

SKU CH-JVGP-R83CX

Replacement CPU cooling fan for Dell Inspiron 16 Plus 7620, part 023.100U5.0001 0996D2, 5 V 0.5 A

  • Accessory TypeCooler
  • Direct replacement for Dell Inspiron 16 Plus 7620 RTX3060
  • Verified part numbers 023.100U5.0001 and 0996D2 ensure fit
  • Low 5 V 0.5 A power draw reduces battery load
  • Pre-tested unit ships ready for immediate installation
  • Single fan design matches original cooling layout

Direct Replacement Fan

This DBTLAP CPU cooling fan matches part number 023.100U5.0001 0996D2 for the Dell Inspiron 16 Plus 7620 with RTX3060 graphics. It operates at 5V 0.5A and is supplied new, tested before dispatch. The package contains one fan unit ready for installation.

Upgrade From Worn Cooling

Replace the original fan when bearing noise appears, airflow drops or the laptop throttles under load. The swap is worth it once temperatures climb above normal idle levels or the original part fails completely. Each unit is photographed from the real item so you can confirm visual identity before fitting.

For 7620 Owners Only

This suits owners of the exact Inspiron 16 Plus 7620 configuration carrying the RTX3060 who need a like-for-like cooler. Builders working on other chassis, different GPU variants or unrelated Dell models should look elsewhere because the mounting and connector are specific to this part number.

Highlights

  • Direct replacement for Dell Inspiron 16 Plus 7620 RTX3060
  • Verified part numbers 023.100U5.0001 and 0996D2 ensure fit
  • Low 5 V 0.5 A power draw reduces battery load
  • Pre-tested unit ships ready for immediate installation
  • Single fan design matches original cooling layout

Specifications

Accessory TypeCooler

Questions about this item

Does the 5V 0.5A fan connector match the Dell Inspiron 16 Plus 7620 motherboard header?

The fan runs at 5V and draws 0.5A, matching the original 023.100U5.0001 specification for the Inspiron 16 Plus 7620 RTX3060. Verify the connector shape against your old unit before fitting.

Which screws must be removed to reach the CPU fan on the Inspiron 16 Plus 7620, and what step is often missed?

Remove the bottom cover screws, disconnect the battery cable first, then unplug the old fan. The step most people skip is reconnecting the battery before testing the new fan.

When should the 0996D2 replacement fan be cleaned or swapped out again?

Clean the heatsink fins and fan blades with compressed air every six months. Replace the fan if bearing noise returns or if CPU temperatures climb above normal under load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.