DBTLAP
DBTLAP Laptop CPU Cooling Fan Dell Inspiron 14 15 5458 5555 P/N DFS541105FC0T FG9V
Replacement CPU cooling fan compatible with Dell Inspiron 14 and 15 series laptops, tested before shipping
- Accessory TypeCooler
- Keeps compatible Dell Inspiron models running cool with a direct‑fit CPU fan
- Tested before shipping so the replacement works straight out of the box
- Matches part numbers DFS541105FC0T and FG9V for 100 % compatibility
- Supports 14‑inch and 15‑inch Inspiron 5458, 5555, 5755 and V3558 series
- Real‑item photos let you verify the exact fan before you buy
Replacement CPU fan for Dell Inspiron 14 and 15
This new DBTLAP cooling fan replaces the original CPU cooler in compatible Dell Inspiron laptops. It fits models including the 14-inch 5458 and 5459 as well as the 15-inch 5555, 5558, 5559, 5755 and 5758. The part number DFS541105FC0T and FG9V must match the original component for correct installation.
Thermally tested unit ready for fitting
Each fan is tested by the supplier before shipping to verify operation. The component draws power from the laptop motherboard header and spins to move air across the heatsink, maintaining processor temperatures during normal workloads. No additional power adapters or software configuration are required once the fan is connected.
Direct swap for listed Inspiron chassis
The fan assembly is shaped for the specific mounting points and cable routing inside the listed Inspiron 14 and 15 chassis. It frees the repairer from sourcing a complete heatsink assembly when only the fan motor has failed. Builders working on other Dell series or different manufacturers should not use this part.
Highlights
- Keeps compatible Dell Inspiron models running cool with a direct‑fit CPU fan
- Tested before shipping so the replacement works straight out of the box
- Matches part numbers DFS541105FC0T and FG9V for 100 % compatibility
- Supports 14‑inch and 15‑inch Inspiron 5458, 5555, 5755 and V3558 series
- Real‑item photos let you verify the exact fan before you buy
Specifications
| Accessory Type | Cooler |
|---|
Questions about this item
How do I install the DFS541105FC0T fan in my Inspiron 5458 and what step is often missed?
Remove the bottom cover, disconnect the old fan cable from the motherboard, swap the fan, then reconnect the cable securely; the step often missed is re-seating the connector fully so the fan reports speed on first boot.
What maintenance will the FG9V cooler need after a year of daily use?
Blow compressed air through the heatsink fins every few months to stop dust build-up; if bearing noise appears or RPM drops, replace the fan unit with another DFS541105FC0T.
What limit appears first when the fan runs continuously at full speed on an Inspiron 5555?
The bearing temperature limit is reached first; sustained max RPM raises internal bearing heat until the fan throttles or shuts down to protect itself.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



