DBTLAP
DBTLAP Laptop Cooling Pad for Lenovo IDEAPAD Y485 Y485P Y485-AEI Y485-ATE MF60120V1-C210-S99
Replacement CPU cooling fan compatible with Lenovo IdeaPad Y485 series laptops
- Accessory TypeCooler
- Direct replacement for Lenovo IDEAPAD Y485 series
- Tested individually for 100% working condition
- Nine-month warranty included with purchase
- Manufactured by Forcecon, ADDA, Sunon or Kipo
- Verify compatibility using MF60120V1-C210-S99 part number
Replacement CPU Fan for Lenovo IdeaPad Y485 Series
This replacement CPU cooler is built for Lenovo IdeaPad Y485, Y485P, Y485-AEI and Y485-ATE laptops. It matches the MF60120V1-C210-S99 part number for direct compatibility. Buyers needing a different form factor or a universal external cooling pad should look elsewhere. Each unit is tested individually before dispatch to confirm operation.
Thermals Noise and Power in Normal Use
The fan draws power from the laptop’s motherboard header and spins at the speed the firmware requests for typical workloads. Acoustic output follows the system curve rather than a fixed maximum. No separate power adapter or software control is required. The assembly ships new and ready to install.
Behaviour Under Sustained Load
During extended sessions the fan maintains the RPM profile dictated by the laptop’s thermal controller. The bearing design supplied by Forcecon, ADDA, Sunon or Kipo supports continuous rotation at the specified duty cycle. No throttle point or maximum temperature rating is published by the manufacturer. The part carries a nine-month seller warranty against defects.
Highlights
- Direct replacement for Lenovo IDEAPAD Y485 series
- Tested individually for 100% working condition
- Nine-month warranty included with purchase
- Manufactured by Forcecon, ADDA, Sunon or Kipo
- Verify compatibility using MF60120V1-C210-S99 part number
Specifications
| Accessory Type | Cooler |
|---|
Questions about this item
How do I install the MF60120V1-C210-S99 fan in my Lenovo IDEAPAD Y485, and which step is often missed?
Remove the bottom cover, disconnect the old fan cable, unscrew the heatsink assembly, swap the fan, then reapply thermal paste on the CPU and GPU before reassembly — skipping the paste replacement is the common error.
What maintenance will this Forcecon, ADDA, Sunon or Kipo replacement fan need later?
Blow dust from the heatsink fins every few months with compressed air; the sleeve bearing is not user-lubricable, so plan to replace the whole unit when noise or vibration returns.
What limit appears first when the Y485 runs sustained loads with this cooler?
The single 5 V fan can only move a fixed air volume, so thermal throttling of the CPU and GPU becomes the bottleneck once heat output exceeds that airflow capacity.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



