We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black laptop cooling fan with four-pin connector

DBTLAP

DBTLAP laptop cooling fan EG50050S1-CH00-S9A DC5V 0.38A 4PIN 023.100LB.0021

SKU CH-3MVY-NSACY

Replacement laptop cooling fan rated at 5 V and 0.38 A with a four-pin connector

  • Accessory TypeCooler
  • Cools your laptop with a 5 V 0.38 A fan
  • Four-pin connector ensures precise speed control
  • Direct replacement for part EG50050S1-CH00-S9A
  • Single fan unit ready to install
  • Each unit tested before it leaves the factory

Replacement Cooling Fan for Laptop

This replacement cooling fan is built for laptops that use the EG50050S1-CH00-S9A part number. It operates on a DC5V supply and draws 0.38A through a four-pin connector. The unit suits repair technicians and owners who need a direct swap for a worn or noisy original fan.

Low-Power Operation and Quiet Running

At 0.38A the fan draws minimal current from the laptop’s 5 V rail, keeping power demand low during everyday tasks. The four-pin interface allows the system to regulate speed, so acoustic output stays subdued while the processor runs at moderate loads.

Steady Airflow Under Continuous Load

When the laptop sustains heavy workloads the fan maintains consistent rotation to move heat away from the heatsink. Each unit is tested before shipping to confirm reliable performance during prolonged thermal stress. Buyers who need a different connector layout or voltage rating should verify the part number before ordering.

Highlights

  • Cools your laptop with a 5 V 0.38 A fan
  • Four-pin connector ensures precise speed control
  • Direct replacement for part EG50050S1-CH00-S9A
  • Single fan unit ready to install
  • Each unit tested before it leaves the factory

Specifications

Accessory TypeCooler

Questions about this item

How do I install the EG50050S1-CH00-S9A 4PIN fan and what step is often missed?

Align the 4PIN connector with the motherboard header, secure the fan screws in a cross pattern, then verify the cable does not foul the heatsink — the missed step is forgetting to re-seat the connector after the first boot.

What maintenance will the DC5V 0.38A cooling fan need later?

Clean dust from the blades and intake vents every few months with compressed air; the sleeve bearing is not user-serviceable, so replace the whole unit if noise or vibration appears.

What limit appears first when the EG50050S1-CH00-S9A runs continuously?

The 0.38 A current draw at 5 V sets the thermal ceiling; sustained load will hit the motor’s temperature rating before airflow drops, so keep chassis vents clear.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.