We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black plastic cooling fan with three-pin connector visible

DBTLAP

DBTLAP EBMPAPST 5015 5CM 12V 85mA 1.0W 512 F/2 3 Pin laptop cooling pad

SKU CH-3RHC-JVJ4V

Replacement 12 V, 85 mA, 1.0 W cooling fan with 512 F/2 spec and 3-pin connector for laptop cooler

  • Accessory TypeCooler
  • Efficient 12 V operation at 85 mA
  • Low 1.0 W power draw keeps system cool
  • 512 F/2 airflow rating for targeted cooling
  • 3-pin connector ensures simple compatibility
  • New condition guarantees reliable replacement performance

Replacement Fan For EBMPAPST 5015

This 12V cooling fan replaces the original EBMPAPST 5015 unit in compatible laptops. It draws 85mA at 1.0W and connects via a 3-pin header. The 512 F/2 specification matches the factory airflow profile. Buyers who need a different voltage or connector layout cannot use this part.

Fits Laptops Using The 5015 Form Factor

The fan slides into the existing cooling assembly without extra brackets or wiring changes. A 3-pin connection supplies power and speed reporting to the system controller. No additional power adapters or software drivers are required. Builders who lack the 5015 mounting pattern must choose another solution.

Direct Swap For A Worn EBMPAPST 5015

Replacing a noisy or failed 5015 fan restores the original thermal performance. The 1.0W rating keeps power draw identical to the stock component. The upgrade is worth it when temperatures rise or bearing noise appears under load. Users seeking higher airflow than the 512 F/2 design provides will need a different model.

Highlights

  • Efficient 12 V operation at 85 mA
  • Low 1.0 W power draw keeps system cool
  • 512 F/2 airflow rating for targeted cooling
  • 3-pin connector ensures simple compatibility
  • New condition guarantees reliable replacement performance

Specifications

Accessory TypeCooler

Questions about this item

How long can the 1.0W fan run before heat becomes the limiting factor?

The 12V, 85mA motor draws 1.0W continuously, so thermal limits depend on the laptop chassis airflow rather than the fan itself.

What noise and heat should I expect when the 5015 fan runs all day?

At 12V and 85mA the unit operates at its rated 1.0W, producing low audible noise and minimal extra heat inside the laptop.

Which existing laptop connector must match the 3-pin 512 F/2 interface?

The replacement requires a 3-pin header with the 512 F/2 pinout; verify the motherboard socket matches before fitting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.