We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black laptop CPU cooling fan with four-pin connector

DBTLAP

DBTLAP CPU Fan for MSI GT62VR 6RD 6RE 7RE Dominator Pro 16L1 16L2 PABD19735BM-N322 4-Pin laptop cooling pad

SKU CH-BSQG-973TE

Replacement CPU cooling fan compatible with MSI GT62VR and Dominator Pro 16L1 16L2 models, 4-pin connector, tested before shipping

  • Accessory TypeCooler
  • Direct replacement for MSI GT62VR 6RD 6RE 7RE Dominator Pro models
  • Four-pin connector matches original motherboard header for simple installation
  • Each unit tested individually before dispatch to confirm full operation
  • Compatible with part number PABD19735BM-N322 for exact fit
  • Supplied as a single fan ready for immediate fitting

Replacement CPU Fan for MSI GT62VR Series

This replacement CPU fan fits MSI GT62VR 6RD, 6RE and 7RE Dominator Pro 16L1 and 16L2 models. It uses a 4-pin connector for direct motherboard attachment. Each unit is tested before shipping to confirm operation. The part number PABD19735BM-N322 identifies the correct component.

For MSI Dominator Pro owners needing a direct swap

This fan suits owners of the listed MSI laptops who need to replace a worn or noisy cooler. It is not for users of other MSI series or different laptop brands. Buyers who cannot verify the part number against their original fan should look elsewhere. The component is a single fan without additional mounting hardware.

4-pin connector and exact model match

The 4-pin connector ensures compatibility with the motherboard header on the supported models. Matching the PABD19735BM-N322 code to the original fan is the single specification that decides fit. Forcecon, ADDA, Sunon or Kipo may be the manufacturer depending on stock. No other specifications determine suitability.

Highlights

  • Direct replacement for MSI GT62VR 6RD 6RE 7RE Dominator Pro models
  • Four-pin connector matches original motherboard header for simple installation
  • Each unit tested individually before dispatch to confirm full operation
  • Compatible with part number PABD19735BM-N322 for exact fit
  • Supplied as a single fan ready for immediate fitting

Specifications

Accessory TypeCooler

Questions about this item

How do I install the 4-pin connector on my MSI GT62VR Dominator Pro without bending the pins?

Align the keyed 4-pin plug with the motherboard header, press straight down until the latch clicks, and route the cable clear of the heatsink screws so the fan sits flush.

When will the Forcecon, ADDA, Sunon or Kipo fan need replacement under normal use?

Expect to replace the fan when bearing noise appears or RPM drops below spec; the 9-month seller warranty covers early failure but lifespan varies by workload and dust buildup.

What thermal limit appears first during sustained loads on the GT62VR 6RD 6RE 7RE models?

The CPU typically hits its thermal throttle point before the single 4-pin fan can exhaust enough heat, causing clock speeds to drop until temperatures fall.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.