We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black laptop CPU cooling fan with three-pin connector

DBTLAP

DBTLAP CPU Fan AB1312HB-AEB KSB0505HA-7K25 3 PIN for HP 4410S 4411S 4415S 4510S 4515S 4416S 4710S

SKU CH-JMET-YDRWA

Replacement CPU cooling fan with three-pin connector for compatible HP laptops

  • Accessory TypeCooler
  • Tested individually for reliable operation
  • 3-pin connector matches original HP fan header
  • Compatible with HP 4410S 4411S 4415S 4510S 4515S 4416S 4710S
  • Replaces part numbers AB1312HB-AEB and KSB0505HA-7K25
  • Manufactured by Forcecon ADDA Sunon or Kipo depending on stock

Replacement CPU Fan for HP Laptops

This new DBTLAP cooling fan replaces the original cooler in HP 4410S, 4411S, 4415S, 4510S, 4515S, 4416S and 4710S models. It uses a 3-pin connector and matches part numbers AB1312HB-AEB and KSB0505HA-7K25. Every unit is tested before shipping to confirm it works.

Direct-fit cooler with tested reliability

The fan mounts directly into the listed HP chassis without modification. It handles standard thermal loads for these notebook platforms and runs until the bearing or motor reaches end of life. The supplier notes that stock may come from Forcecon, ADDA, Sunon, Kipo or equivalent manufacturers depending on availability.

Three-pin connector decides compatibility

Only laptops that use the exact 3-pin header and the AB1312HB-AEB or KSB0505HA-7K25 part numbers will accept this cooler. Builders with 4-pin PWM headers, different pinouts or other HP series cannot use this part.

Highlights

  • Tested individually for reliable operation
  • 3-pin connector matches original HP fan header
  • Compatible with HP 4410S 4411S 4415S 4510S 4515S 4416S 4710S
  • Replaces part numbers AB1312HB-AEB and KSB0505HA-7K25
  • Manufactured by Forcecon ADDA Sunon or Kipo depending on stock

Specifications

Accessory TypeCooler

Questions about this item

Will the 3-pin connector on this AB1312HB-AEB fan plug directly into the motherboard header of my HP 4510S without an adapter?

Yes, the fan uses a 3-pin connector that matches the original header on the HP 4410S, 4411S, 4415S, 4510S, 4515S, 4416S and 4710S models.

How can I confirm the KSB0505HA-7K25 replacement is spinning at the correct speed after I install it?

Enter the BIOS hardware monitor or use a utility such as HWMonitor; the fan RPM should appear and rise smoothly when the CPU load increases.

Does the package include mounting screws or thermal paste, or do I need to buy them separately?

The box contains only the 1 x Fan (tested before shipping); screws and thermal compound are not included and must be sourced separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.