DBTLAP
DBTLAP CPU Cooler Fan for Acer Aspire One 1410 1820P ZH7 AB6305HX-RBB
Replacement CPU cooling fan compatible with Acer Aspire One 1410, 1420P, 1810TZ, 1820P and ZH7 models, tested before shipping
- Accessory TypeCooler
- Direct replacement for Acer Aspire One 1410 1820P models
- Operates at .5 A for efficient cooling performance
- Tested before shipping to ensure reliable operation
- Compatible with part numbers ZH7 AB6305HX-RBB 752
- 5 V power supply matches original laptop requirements
Replacement fan for Acer Aspire One
This DBTLAP cooler fan replaces the original cooling unit in Acer Aspire One 1410, 1410T, 1820P, 1810TZ, 752 and 1420P models. It is built for owners who need a direct swap when the stock fan fails or becomes noisy. The part number AB6305HX-RBB must match the label on the existing fan for correct fitment.
5 V, 0.5 A low-power operation
The fan runs from the laptop’s 5 V rail at a rated 0.5 A draw, adding minimal load to the system. Normal operation stays quiet enough for office or classroom environments while moving sufficient air across the heatsink. Each unit is tested before shipping to confirm electrical function and bearing smoothness.
Steady airflow under sustained load
During extended sessions the fan maintains consistent RPM to keep CPU temperatures stable rather than spiking and dropping. It is not designed for high-performance gaming chassis or external cooling pads that demand higher static pressure. Buyers who need variable-speed control or PWM signalling should verify the original motherboard header supports the fan’s two-wire configuration.
Highlights
- Direct replacement for Acer Aspire One 1410 1820P models
- Operates at .5 A for efficient cooling performance
- Tested before shipping to ensure reliable operation
- Compatible with part numbers ZH7 AB6305HX-RBB 752
- 5 V power supply matches original laptop requirements
Specifications
| Accessory Type | Cooler |
|---|
Questions about this item
How do I install the CWZH7 fan in my Aspire One 1410 and what step do people miss?
Remove the bottom cover, unplug the old fan connector, swap the CWZH7 unit in, then reconnect the cable before reassembling; the step often missed is verifying the connector orientation matches the motherboard header.
What maintenance will this 5V 0.5A CWZH7 fan need over time?
Clean dust from the fan blades and heatsink fins every few months with compressed air; replace the unit if bearing noise appears or airflow drops noticeably.
What limit appears first when the CWZH7 fan runs continuously under load?
The 5V 0.5A power rating caps sustained airflow, so the fan reaches its maximum cooling capacity before thermal throttling becomes an issue.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



