We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small square 70x70x10mm laptop cooling fan with black frame and 2-pin connector

DBTLAP

DBTLAP 7010M12B ND1 70x70x10mm 12V 0.25A 2-pin laptop cooling fan

SKU CH-9DZZ-EPV33

A 70 × 70 × 10 mm, 12 V, 0.25 A, 2-pin ball-bearing fan tested before shipping for direct laptop replacement

  • Accessory TypeCooler
  • Slim 10 mm profile fits tight laptop chassis
  • 12 V .25 A draw keeps power use low
  • 70 mm square frame matches original mounting points
  • 2-pin connector enables direct motherboard hookup
  • Tested before shipping ensures reliable operation

Replacement fan for 7010M12B ND1

This 70 mm by 10 mm slim fan is built to replace the original cooler in compatible laptops. It runs on 12 V and draws 0.25 A through a two-pin connector. The unit is new and tested before dispatch. Buyers who need a different voltage, pin layout or frame thickness cannot use this part.

Ball-bearing construction and two-pin power

A ball-bearing motor reduces friction for longer service life in a thin profile. The two-pin lead supplies power only, so speed reporting or PWM control is not available. Mounting holes match the 70 mm square footprint. Builders who require a three-pin or four-pin header should look elsewhere.

12 V 0.25 A rating decides fit

The electrical rating of 12 V at 0.25 A is the single figure that confirms compatibility with the target laptop. Verify the original fan carries the same voltage and current before ordering. Systems expecting a different amperage or voltage will not operate correctly with this cooler.

Highlights

  • Slim 10 mm profile fits tight laptop chassis
  • 12 V .25 A draw keeps power use low
  • 70 mm square frame matches original mounting points
  • 2-pin connector enables direct motherboard hookup
  • Tested before shipping ensures reliable operation

Specifications

Accessory TypeCooler

Questions about this item

What voltage and current does the 2-pin connector supply to the 7010M12B ND1 fan?

The fan runs on 12 V and draws 0.25 A through its 2-pin connector.

What are the exact mounting dimensions for the 7010M12B ND1 cooler?

The unit measures 70 mm by 70 mm by 10 mm, so the mounting holes must match that 70 x 70 mm footprint.

How is the 7010M12B ND1 fan installed, and what step is often missed?

Remove the old fan, align the 2-pin plug with the motherboard header, secure the 70 x 70 mm frame with screws, then verify the connector is fully seated — partial insertion is the common mistake.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.