Dayton
Dayton Wire Rope 25 ft 1/8 in 420 lb 304 Stainless Steel
25 ft of 1/8 in 304 stainless steel wire rope with a 420 lb working load limit and 2,100 lbf breaking strength for lifting applications
- 304 stainless steel resists corrosion in harsh environments
- 420 lb working load limit handles demanding lifting tasks
- 2100 lbf breaking strength provides a strong safety margin
- 1 x 7 strand construction delivers high strength with minimal stretch
- 25 ft length suits a variety of rigging applications
Dayton 304 Stainless Wire Rope 25 ft
This wire rope is 25 ft long with a 1/8 in diameter. It is made from 304 stainless steel and has an IWRC core. The working load limit is 420 lb and the breaking strength is 2,100 lbf. It is unlubricated and has a plain end finish.
Suits light lifting and rigging tasks needing
Not for buyers who need a lubricated rope for reduced friction. Not for applications requiring a larger diameter or higher working load limit. Not for users who need a coated or vinyl-covered cable. Not for situations demanding a specific bend radius specification.
420 lb working load limit decides suitability
Check that the 420 lb working load limit meets the safety factor required for your load. The 1 x 7 strand construction offers limited flexibility compared to other classifications. The 304 stainless material provides general corrosion resistance. Verify the plain end termination works with your hardware.
Highlights
- 304 stainless steel resists corrosion in harsh environments
- 420 lb working load limit handles demanding lifting tasks
- 2100 lbf breaking strength provides a strong safety margin
- 1 x 7 strand construction delivers high strength with minimal stretch
- 25 ft length suits a variety of rigging applications
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
What is the working load limit that determines safe sustained use?
The working load limit is 420 lb, which is the maximum load that should be applied during normal operation.
Does the rope generate heat or noise during extended use?
Wire rope itself does not generate heat or noise; any temperature rise or sound comes from the sheaves, drums or load it runs over.
What fittings are needed to attach this plain-end rope?
The rope has plain ends, so you must supply thimbles, clips, swaged sleeves or other terminations suited to 1/8 in 1×7 stainless construction.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
