We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton forward-curved steel blower wheel 11 1/8 in diameter 10 1/8 in width 92 blades center hub

Dayton

Dayton VTSYT1010LWG Blower Wheel 11 1/8 in Diameter 10 1/8 in Width 92 Blades 1200 RPM

SKU CH-CDY9-2MZPW

Forward-curved steel blower wheel with 92 blades, 11 1/8 in diameter and 10 1/8 in width, rated for 1200 RPM belt-drive operation

  • Forward-curved design moves air efficiently at 1200 RPM
  • 92 steel blades deliver consistent airflow at 1200 RPM
  • 11 1/8 in diameter fits standard belt-drive housings
  • 10 1/8 in width matches existing blower assemblies
  • Dual-inlet configuration doubles intake capacity per rotation

Blower Wheel 11 1/8 in Diameter

This Dayton blower wheel is a forward-curved steel component designed for belt-driven machinery. It features a 11 1/8 in diameter and 10 1/8 in width with 92 blades. The unit suits maintenance technicians and equipment builders replacing worn impellers in ventilation or material-handling systems.

Includes Set Screws for Secure Mounting

The wheel ships with set screws included so installers can lock the 3/4 in bore onto the shaft without sourcing separate hardware. Its tabbed construction and convex hub keep the blades aligned at the rated 1200 RPM maximum speed. This hardware reduces assembly time during scheduled overhauls.

1200 RPM Maximum Speed Rating

The 1200 RPM limit is the critical specification that determines whether this wheel matches the application. Exceeding this speed risks structural failure and unsafe operation. Buyers who need higher rotational speeds or a different bore size must select another part.

Highlights

  • Forward-curved design moves air efficiently at 1200 RPM
  • 92 steel blades deliver consistent airflow at 1200 RPM
  • 11 1/8 in diameter fits standard belt-drive housings
  • 10 1/8 in width matches existing blower assemblies
  • Dual-inlet configuration doubles intake capacity per rotation

Specifications

BrandDAYTON

Questions about this item

Will the set screws supplied with the wheel need periodic re-torquing?

The wheel includes set screws for hub locking; check and re-torque them after the first few hours of operation and at each scheduled belt-service interval.

At 1200 RPM what limits continuous running time?

The wheel is rated for a maximum speed of 1200 RPM; sustained operation at that speed must not exceed the motor nameplate temperature rise or belt-tension limits.

How much noise and heat does the 11 1/8 in steel wheel generate during all-day belt-driven use?

The 92-blade forward-curved steel wheel moves air at 1200 RPM; noise and heat depend on the matched motor and duct static pressure rather than the wheel alone.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.