We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver three-blade aluminium propeller 16 inch diameter 1/2 inch bore

Dayton

Dayton VE10D983PG 16" Propeller Blower 1/2" Bore 26.8° Pitch

SKU CH-S75S-YDSC3

16-inch aluminum propeller with 1/2-inch bore, 26.8-degree pitch and three blades for direct-drive replacement

  • 16 in diameter moves high air volume for HVAC systems
  • 8 degree pitch optimises airflow at 1743 RPM
  • 1/2 in bore fits 1/4 hp direct-drive motors
  • Three aluminium blades resist corrosion in continuous use
  • Centralised hub ensures balanced rotation on Dayton 10D983D units

Direct-drive 16" propeller for HVAC systems

This 16-inch Dayton propeller is built as a direct-drive replacement for compatible blower assemblies. The 1/2-inch bore and 26.8-degree pitch match the original specification for precise fitment. It suits maintenance technicians and facility managers restoring airflow performance in existing equipment.

Three-blade aluminium hub with centralized mounting

The three-blade aluminium construction resists corrosion while keeping rotational mass low for direct-drive operation. A centralized hub location ensures balanced rotation on the motor shaft without additional alignment hardware. The 12.7-millimetre bore accepts the specified motor shaft directly for a secure, vibration-resistant connection.

Clockwise rotation at 1743 RPM for 1/4 HP motors

Rated for 1743 RPM on a quarter-horsepower motor, the propeller delivers consistent airflow with minimal mechanical noise. Clockwise rotation and the fixed blade pitch maintain design-point pressure and volume without adjustment. Direct drive eliminates belt wear and slippage, reducing maintenance intervals in continuous-duty HVAC installations.

Highlights

  • 16 in diameter moves high air volume for HVAC systems
  • 8 degree pitch optimises airflow at 1743 RPM
  • 1/2 in bore fits 1/4 hp direct-drive motors
  • Three aluminium blades resist corrosion in continuous use
  • Centralised hub ensures balanced rotation on Dayton 10D983D units

Specifications

BrandDAYTON

Questions about this item

How does the 1/2 inch bore interface limit the motor shaft size it can accept?

The 1/2 inch bore fits only a 12.7 mm motor shaft; larger or smaller shafts will not mount without a separate adapter.

What physical clearance does the 16 inch diameter and centralized hub require for mounting?

The 16 inch propeller needs a clear radius of at least 8 inches around the motor centreline for the blades and hub to rotate freely.

How is the propeller installed on the motor shaft and which step is often missed?

Slide the propeller onto the 1/2 inch shaft, align the keyway if present, then tighten the set screw securely; the missed step is confirming clockwise rotation matches the motor direction.

More in Blowers

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.