We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton 24 inch aluminum blower propeller three blades clockwise rotation

Dayton

Dayton VE10D979PG Blower Propeller 24 in 24.2 Deg Pitch

SKU CH-33GQ-FQB7F

24-inch aluminum propeller with 24.2-degree pitch, 1/2 hp at 1076 RPM, 1/2-inch bore, three blades, direct-drive CW rotation

  • 24-inch diameter moves large air volumes for effective ventilation
  • 2-degree pitch optimises airflow at 1076 RPM for efficient circulation
  • Three aluminium blades reduce weight while resisting corrosion in HVAC systems
  • Direct-drive design eliminates belt maintenance for reliable continuous operation
  • 1/2 hp rating suits standard blowers without oversizing the motor

Dayton 24 in Blower Propeller

This 24 inch diameter propeller is designed for direct drive blower applications. It features a 24.2 degree blade pitch and a 1/2 inch bore for secure shaft mounting. The unit operates at 1076 RPM and is rated for 1/2 hp motors. It suits maintenance technicians and HVAC installers replacing worn blades on compatible equipment.

Aluminum Three Blade Construction

The three aluminum blades provide a balance of airflow capacity and corrosion resistance for indoor air handling. Clockwise rotation with intake side hub location directs air efficiently through the blower housing. Direct drive mounting eliminates belt maintenance and alignment tasks. The fixed 24.2 degree pitch cannot be adjusted for different static pressure requirements.

Half Horsepower Airflow Capacity

At 1076 RPM this propeller moves air volumes suitable for 1/2 hp motor loads in residential and light commercial units. It handles standard duct static pressures found in furnace and air handler blowers. The 1/2 inch bore limits use to motors with matching shaft diameters. Builders needing higher static pressure or larger shaft sizes must select a different propeller model.

Highlights

  • 24-inch diameter moves large air volumes for effective ventilation
  • 2-degree pitch optimises airflow at 1076 RPM for efficient circulation
  • Three aluminium blades reduce weight while resisting corrosion in HVAC systems
  • Direct-drive design eliminates belt maintenance for reliable continuous operation
  • 1/2 hp rating suits standard blowers without oversizing the motor

Specifications

BrandDAYTON

Questions about this item

Will the 1/2 in bore or the aluminum blades need replacement first?

The 1/2 in bore fits the motor shaft directly; aluminum blades resist corrosion but can fatigue if vibration or debris strikes occur during continuous 1076 RPM operation.

What limits continuous duty — the 1/2 hp rating or the 1076 RPM speed?

The 1/2 hp motor rating sets the thermal ceiling; sustained load at 1076 RPM will hit that power limit before the speed itself becomes a constraint.

How much noise and heat does the 24 in propeller generate at 1076 RPM?

A 24 in aluminum propeller at 1076 RPM moves significant air volume; expect noticeable broadband noise and motor heat proportional to the 1/2 hp draw under load.

More in Blowers

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.