We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton hand chain hoist, metallic body with chain loop, 20 ft lift capacity

Dayton

Dayton GGS_57105 Hand Chain Hoist 20 ft 4,000 lb

SKU CH-D9VV-WMWSH

Manual hand chain hoist lifts 4,000 lb loads up to 20 ft with 38.06 ft chain length

  • Lifts loads up to 4,000 lb with manual chain operation
  • Provides 20 ft of vertical lift height for elevated work
  • Extends 38.06 ft overall length for flexible rigging
  • Operates without power supply using hand chain control
  • Built by Dayton for industrial lifting and pulling tasks

Dayton GGS_57105 Hand Chain Hoist

The Dayton GGS_57105 is a manual chain hoist rated for a 4,000 lb load capacity and a 20 ft lift height. It serves maintenance crews, riggers and industrial shops that need reliable vertical lifting without compressed air or electric power. The unit belongs to the Dayton compatible series and has an overall length of 38.06 ft. It arrives new and ready for immediate service.

Manual operation thermals noise and power

Because the hoist is entirely hand operated it produces no motor heat, no electrical draw and no powered noise during normal use. The only sound comes from the chain engaging the load sprocket and the brake mechanism holding the load. There are no thermal limits or duty-cycle restrictions tied to an energy source. Operators control speed and stopping force directly through the hand chain.

Build fit and rigging needs

The 38.06 ft overall length means the hoist body and chain require sufficient headroom above the load and clear space for the hand chain to travel. A suitable overhead beam, trolley or fixed anchor rated for at least the working load is required to mount the unit. The manual design frees the site from needing electrical outlets, pneumatic lines or control cabling. Buyers who need powered lifting or longer lift heights will need a different solution.

Highlights

  • Lifts loads up to 4,000 lb with manual chain operation
  • Provides 20 ft of vertical lift height for elevated work
  • Extends 38.06 ft overall length for flexible rigging
  • Operates without power supply using hand chain control
  • Built by Dayton for industrial lifting and pulling tasks

Specifications

BrandDAYTON

Questions about this item

How is the Dayton GGS_57105 hand chain hoist installed, and what step do people often get wrong?

Mount the hoist to a rated support structure using the top hook, ensure the load chain hangs freely without twists, and verify the hand chain feeds smoothly through the wheel — the step most often missed is confirming the chain is not twisted before the first lift.

What maintenance or replacement will the Dayton GGS_57105 hand chain hoist need over time?

Inspect the load chain and hand chain regularly for wear, stretch, or damaged links; lubricate the chain and gears per the manufacturer's schedule; replace the load chain if it exceeds allowable wear limits or shows deformation.

What limit appears first on the Dayton GGS_57105 hand chain hoist during sustained use?

The 4,000 lb load capacity is the primary limit — exceeding it risks mechanical failure; the 20 ft lift height defines the maximum travel; operator fatigue from sustained manual pulling often becomes the practical limit before the hoist itself reaches a thermal or mechanical stop.

More in Lifting, Pulling & Conveying

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.