We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton hand chain hoist, silver metal body with black chain loops, 17.75 ft overall length

Dayton

Dayton GGS 57103 Hand Chain Hoist 10 ft 4000 lb 17.75 ft

SKU CH-DAWQ-VDD10

A manual hand chain hoist rated for 4,000 lb with 10 ft of lift and 17.75 ft of chain

  • Lifts up to 4,000 lb with manual chain operation
  • Provides 10 ft of vertical lift for overhead tasks
  • 75 ft hand chain length allows ground-level control
  • Built for manual chain hoist applications in industrial settings
  • New Dayton unit ready for immediate lifting work

Dayton GGS 57103 hand chain hoist

This manual chain hoist lifts loads up to 4,000 lb through a vertical travel of 10 ft. It is built for workshops and job sites where powered lifting is unavailable or impractical. The 17.75 ft overall chain length supports the rated lift height and provides operating slack. Operators who need precise, human-powered vertical movement will find it suitable.

Manual operation limits

The hoist relies entirely on hand-chain effort, so lifting speed and duty cycle depend on the operator. Continuous or very frequent lifts will fatigue the user faster than powered alternatives. The 10 ft lift height is fixed by the chain length; applications requiring more travel cannot use this unit. Loads exceeding 4,000 lb are beyond the rated capacity and must not be attempted.

Pre-installation checks

Verify that the mounting structure can support the full 4,000 lb load plus the weight of the hoist itself. Confirm at least 10 ft of clear vertical space for the hook to travel without obstruction. Ensure the hand chain can move freely through its entire 17.75 ft length without snagging on nearby equipment. Check that the load hook and any rigging hardware match the hoist's capacity rating.

Highlights

  • Lifts up to 4,000 lb with manual chain operation
  • Provides 10 ft of vertical lift for overhead tasks
  • 75 ft hand chain length allows ground-level control
  • Built for manual chain hoist applications in industrial settings
  • New Dayton unit ready for immediate lifting work

Specifications

BrandDAYTON

Questions about this item

How does the 4,000 lb load capacity apply when the hoist is installed in a workshop?

The 4,000 lb rating is the maximum working load the hoist can lift vertically under manual chain operation; it assumes the supporting structure and rigging are rated for at least that weight.

What does the 10 ft compatible lift height mean once the hoist is mounted?

The 10 ft lift height is the maximum vertical travel the load hook can move from its lowest to highest position when the hand chain is fully operated.

What manual chain interface does the Dayton 57103 use and what does it limit?

It uses a standard hand-chain loop that the operator pulls to raise or lower the load; the interface limits speed to the operator's pulling rate and requires no external power.

More in Lifting, Pulling & Conveying

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.