We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton hand chain hoist with steel chain and hook, 57093 model

Dayton

Dayton GGS 57093 Hand Chain Hoist 2000 lb 10 ft 17.75 ft

SKU CH-79H1-6N5ED

Manual chain hoist lifts 2,000 lb loads up to 10 ft with 17.75 ft chain length

  • Lifts up to 2,000 lb for heavy-duty tasks
  • 10 ft lift height reaches elevated work areas
  • 75 ft chain length provides extended operating range
  • Manual chain operation requires no external power source
  • Dayton series compatibility ensures consistent performance

What this hand chain hoist is and who it is for

The Dayton GGS 57093 is a manual chain hoist rated for a 2,000 lb load capacity with a 10 ft lift height. It is built for workshops and job sites where portable, human-powered lifting is required. The 17.75 ft overall chain length provides the reach needed for typical overhead tasks.

What it replaces and when the upgrade makes sense

This hoist replaces lighter-duty manual chain hoists that cannot handle the 2,000 lb rating or the 10 ft lift height. The step up is worth it when the work regularly involves loads near the two-thousand-pound limit or when the extra lift distance eliminates the need for repositioning the anchor point.

How it behaves under sustained load

Because the mechanism is entirely manual, the effort required scales directly with the weight being lifted and does not diminish over time. There is no motor to overheat or battery to drain, so the hoist delivers consistent performance for as long as the operator can apply force. The 17.75 ft chain length remains fully available throughout extended lifting cycles.

Highlights

  • Lifts up to 2,000 lb for heavy-duty tasks
  • 10 ft lift height reaches elevated work areas
  • 75 ft chain length provides extended operating range
  • Manual chain operation requires no external power source
  • Dayton series compatibility ensures consistent performance

Specifications

BrandDAYTON

Questions about this item

What headroom does the 17.75 ft overall length require for mounting the 2,000 lb hand chain hoist?

The hoist body plus chain needs at least 17.75 ft of clear vertical space to hang and operate through its full 10 ft lift.

How do I attach the load chain so it feeds correctly on this Dayton 57093 hoist?

Thread the free end of the load chain through the bottom hook block, ensure the welds face away from the sheave, then pull until the chain seats in the load sprocket pockets.

When should the load chain on this 10 ft lift hoist be replaced?

Replace the chain when any link stretches beyond 3 % of its original pitch or shows gouges, nicks, or corrosion that reduce the cross-section.

More in Lifting, Pulling & Conveying

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.