We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton 18 inch three blade aluminum propeller 10 mm bore clockwise rotation

Dayton

Dayton GGS_47617 Propeller 18 in 10 mm Bore CW 3 Blade 1075 RPM 1/4 hp

SKU CH-K6W8-Z2FYF

18-inch three-blade aluminium propeller with 10 mm bore, clockwise rotation and 21-degree pitch for direct-drive 1/4 hp motors at 1075 RPM

  • 18-inch diameter moves high air volume
  • 10 mm metric bore fits compatible shafts directly
  • Three aluminum blades balance airflow and durability
  • 1075 RPM at 1/4 hp delivers rated performance
  • 21-degree pitch optimises static pressure for blower use

18-inch 3-blade propeller for direct-drive blowers

This 18-inch aluminium propeller has a 10 mm bore, 21-degree pitch and clockwise rotation. It is designed for direct-drive blower assemblies such as the 1HLA4C and runs at 1075 RPM with a 1/4 hp rating.

Suited for replacement on compatible Dayton blowers

The fixed 10 mm bore and clockwise rotation mean it only fits shafts and housings that match those exact specifications. Builders needing a different bore size, counter-clockwise rotation or a higher blade count should look elsewhere.

Delivers rated airflow at 1075 RPM on 1/4 hp motors

At the stated speed and power the propeller moves the design volume for the intended blower. It will not develop sufficient pressure or flow if the motor cannot reach 1075 RPM or if the system static pressure exceeds the curve for this blade geometry.

Highlights

  • 18-inch diameter moves high air volume
  • 10 mm metric bore fits compatible shafts directly
  • Three aluminum blades balance airflow and durability
  • 1075 RPM at 1/4 hp delivers rated performance
  • 21-degree pitch optimises static pressure for blower use

Specifications

BrandDAYTON

Questions about this item

What motor shaft diameter does the 10 mm bore propeller require?

The propeller fits a 10 mm motor shaft, which matches the 2/5 in bore specification.

Will the 18 in 3-blade propeller work with my existing 1HLA4C blower housing?

Yes, the supplier lists the 1HLA4C as the intended housing for this propeller.

How can I confirm the propeller is rotating correctly after installation?

With the motor running, the blades should turn clockwise when viewed from the intake side at 1075 RPM.

More in Blowers

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.