Dayton
Dayton Electric Chain Hoist 800 lb 10 ft Lift
Electric chain hoist lifts 800 lb loads up to 10 ft at 7 fpm on 115V AC power
- Lifts heavy loads with 800 lb capacity
- Reaches work areas using 10 ft lift height
- Operates on standard 115V AC power
- Compact 16 3/4 in headroom fits tight spaces
- Includes California Proposition 65 chemical disclosure
800 lb Electric Chain Hoist
This Dayton electric chain hoist lifts loads up to 800 lb with a 10 ft maximum lifting length. It operates on a 115V AC supply drawing 3 A and uses a 1/4 hp single-speed motor. The hook-mounted design requires no trolley and provides 16 3/4 in of headroom. It suits workshops and light industrial settings where occasional vertical lifting is needed.
Replaces Manual or Lower-Capacity Hoists
The unit upgrades from hand-chain or lever hoists by removing manual effort for repetitive lifts at a fixed speed of 7 fpm. The jump is worth it when daily lift cycles exceed what an operator can sustain safely by hand and when the 800 lb capacity covers the heaviest regular load. It does not serve applications needing variable speed, trolley travel or duty cycles beyond the H2 classification.
Check Power Supply and Mounting Point
Verify that a 115V AC circuit capable of delivering 3 A is available at the mounting location. Confirm the overhead structure can support the hoist weight plus the full 800 lb load with the required 16 3/4 in headroom clearance. Ensure the hook mounting point is compatible and that the H2 duty rating matches the expected frequency of use.
Highlights
- Lifts heavy loads with 800 lb capacity
- Reaches work areas using 10 ft lift height
- Operates on standard 115V AC power
- Compact 16 3/4 in headroom fits tight spaces
- Includes California Proposition 65 chemical disclosure
Specifications
| Brand | Dayton |
|---|
Questions about this item
What overhead clearance does the 16 3/4 in headroom require for the 800 lb hook-mounted hoist?
Allow at least 16 3/4 inches of clear vertical space above the load hook so the hoist body and chain container can sit without striking the ceiling or beam flange.
Which wiring step is most often missed when connecting the 115V AC single-phase motor?
Connect the supply to a dedicated 15 A circuit with a grounded three-prong receptacle; skipping the ground or sharing the circuit causes nuisance tripping.
How often should the load chain be inspected and lubricated on this H2 duty hoist?
Inspect the chain for wear, stretch or damage before each shift and apply light machine oil weekly or after heavy use to maintain the 10 ft lift rating.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
