Dayton
Dayton 7DJ28 24" Industrial Blower 115V 2-Speed 6100 CFM High-Visibility Stationary
A 24-inch stationary industrial blower with two-speed direct-drive motor delivering up to 6100 CFM on 115 V AC
- High airflow reaches 6100 CFM on high speed
- Two-speed motor delivers 3800 CFM on low setting
- Direct-drive 1/3 HP motor runs at 1075 RPM
- High-visibility yellow housing improves workplace safety
- Mounts on I-beam or post for flexible installation
High-Visibility Industrial Blower
The Dayton 7DJ28 is a stationary 24-inch industrial blower designed for high-visibility air circulation in workshops, warehouses and HVAC applications. It operates on 115V AC single-phase power and delivers two-speed performance with a permanent split capacitor motor. The direct-drive unit mounts on I-beams or posts for fixed-position airflow.
Suited for fixed high-volume airflow.
This blower suits facilities needing consistent, high-volume air movement at two defined speeds without oscillation. High speed provides 6100 CFM and 520 ft/min velocity at 20 feet; low speed provides 3800 CFM and 365 ft/min. Buyers who need oscillating coverage, variable speed control, or portability should look at other fan types. The 74 dBA sound level and 104°F max ambient temperature define its operating envelope.
Direct-drive mounting on I-beam or post
Installation involves securing the 33-inch diameter housing to an I-beam or post using the designated mounting points. The direct-drive design eliminates belt maintenance, but the unit weighs enough to require solid structural support and safe lifting practices. Common issues include underestimating the 3.28-amp high-speed draw on shared circuits and ensuring clearance for the 33-inch height and width in tight mounting locations.
Highlights
- High airflow reaches 6100 CFM on high speed
- Two-speed motor delivers 3800 CFM on low setting
- Direct-drive 1/3 HP motor runs at 1075 RPM
- High-visibility yellow housing improves workplace safety
- Mounts on I-beam or post for flexible installation
Specifications
| Brand | DAYTON |
|---|
Questions about this item
What mounting hardware is needed to attach the 24 in blade blower to an I-beam or post?
The blower is designed for I-beam or post mounting; you must supply compatible brackets, bolts or clamps rated for the unit's 33 in width and weight.
Will the 115 V AC motor run on a standard 15 A household circuit alongside other tools?
Yes, the motor draws 3.28 A on high and 2.29 A on low, well within a typical 15 A branch circuit even with moderate additional loads.
How can I confirm the blower is delivering the rated 6100 CFM on high speed after installation?
Measure airflow at 20 ft from the fan; a reading near 520 ft/min indicates the high-speed CFM is being achieved as specified.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
