Dayton
Dayton 6Y945 Belt and Disc Sander 1/3 HP 115 V 42 in Belt 6 in Disc 3590 RPM
Benchtop belt and disc sander with a 42 in belt, 6 in disc, 1/3 hp motor and 45° table tilt for metal, plastic and wood
- Smooth finishing on metal, plastic or wood
- 42-inch belt runs horizontally or vertically
- 6-inch disc table tilts 45 degrees out
- 1/3 hp single-phase motor at 115 volts
- Fixed 3,590 RPM disc speed with 4,480 SFPM belt
Dayton 6Y945 Belt and Disc Sander
The Dayton 6Y945 is a benchtop belt and disc sander driven by a 1/3 HP single-phase motor. It operates on 115 V power and provides a fixed-speed configuration for consistent material removal. The unit combines a 42 in by 2 in belt with a 6 in diameter grinding wheel for versatile finishing tasks.
Suited to metal, plastic and wood fabrication
This machine suits workshops that need both horizontal and vertical belt orientation alongside disc grinding in one footprint. Buyers who require variable speed control or a larger disc diameter for heavy stock removal should look at alternative equipment. The fixed 3,590 RPM wheel speed and single belt speed limit flexibility for specialised applications.
Sustained load behaviour
Under continuous use the 1/3 HP motor delivers steady torque at the rated 480 SFPM belt speed and 3,590 RPM disc speed. The fixed single-speed design means output does not fluctuate during extended sessions, though the motor is sized for light to medium duty cycles rather than continuous heavy production runs.
Highlights
- Smooth finishing on metal, plastic or wood
- 42-inch belt runs horizontally or vertically
- 6-inch disc table tilts 45 degrees out
- 1/3 hp single-phase motor at 115 volts
- Fixed 3,590 RPM disc speed with 4,480 SFPM belt
Specifications
| Brand | DAYTON |
|---|
Questions about this item
What power supply does the 115 V sander need to run?
It operates on a 115 V single-phase supply, which is standard for North American household outlets.
Can the 42 in belt be used in both horizontal and vertical positions?
Yes, the belt orientation is adjustable between horizontal and vertical to suit the workpiece.
How do I verify the disc is running at the correct 3590 RPM?
The disc speed is fixed at 3,590 RPM with a single-speed motor; no adjustment is required or possible.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
